- RS庫存編號:
- 146-5267
- 製造零件編號:
- ASNU 25
- 製造商:
- Stieber
當前暫無庫存,可於02/08/2024發貨,6 工作日送達。
已增加
單價(不含稅) 個
TWD11,138.00
(不含稅)
TWD11,694.90
(含稅)
單位 | Per unit |
1 - 4 | TWD11,138.00 |
5 + | TWD10,694.00 |
- RS庫存編號:
- 146-5267
- 製造零件編號:
- ASNU 25
- 製造商:
- Stieber
產品概覽和技術數據資料表
法例與合規
不適用
產品詳細資訊
Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.
規格
屬性 | 值 |
---|---|
Inside Diameter | 25mm |
Outside Diameter | 62mm |
Torque | 125Nm |
Race Width | 24mm |
Series | 63 |
Over-running Speed | 1700 (Inner) rpm, 2600 (Outer) rpm |
Keyway | Inner and Outer Race |
Drag Torque | 5.6Ncm |