This pneumatic shock absorber from Festo is suitable for use in a hydraulic cylinder. It cushions the impact of a moving piston and prevents damage and unnecessary wear to moving parts. The unit is self-adjusting and automatically reacts to the force applied to it. It has a built-in pressure spring to mechanically move the piston rod back to its original position. The component's seals are made from nitrile rubber (NBR), which offers resistance to heat and corrosion.
• Stroke length of 20 mm • Maximum impact speed of 3 m/s • Reset time range of 0.3 s to 1 s • Pushing action mode of operation • Cushioning length of 20 mm • Maximum stop force of 1000 N • Reset force of 5 N • Housing material of galvanised steel • Piston rod material of high alloy steel • Operating temperature range of -10°C to +80°C • Locknut mounting • Weight of 78 g
Range Information
• The YSRW series of pneumatic shock absorbers is designed to improve production quality by moderating the damaging side effects of motion, noise and vibration • The range features galvanised steel housings that are resistant to corrosion and stand up to the demands of high-temperature applications
The Festo push-in sleeve has push/pull principle of structure which used PBT type of housing material. Its nominal size is 3.8mm and can be assembled in any position.
Container size 50 Ambient temperature -10 to 80 °C
