Festo Shock Absorber - DYSW Series - DYSW-8-14-Y1F
This shock absorber from Festo uses hydraulic oil to dissipate shock energies. It can handle a maximum impact speed of three metres per second. The component is self-adjusting, and its single-acting operation smoothly and gradually stops movement without causing bounce-back. The high-alloy steel construction of the housing and piston rod ensures good resistance to corrosion for safety and long use in tough industrial environments. This device's slowly increasing cushioning force-curve makes it suited to low-vibration applications.
• Body length of 66.05 mm • Cushioning length of 14 mm • Overall length of 80.05 mm • Weight of 42 g • Maximum energy capacity of 21000 Nm per hour • Maximum energy capacity of 4 Nm per cycle • Minimum operating temperature of -10°C • Maximum operating temperature of +80°C
Range Information
• The DYSW series is Festo's durable and maintenance-free range of industrial shock absorbers • Cushioning components are available in a variety of sizes and stroke lengths • They have a slowly increasing cushioning force curve with a long cushioning stroke and permit short cycle times • Designed with a continuous thread with an internal hex, they're easy to mount onto any industrial production system • The range is corrosion-resistant against condensation in indoor applications
The Festo push-in sleeve has push/pull principle of structure which used PBT type of housing material. Its nominal size is 7.1mm and can be assembled in any position.
Container size 20 Ambient temperature -10 to 80 °C
