Raspberry Pi, Pi NoIR Series, Camera Module Camera Module, CSI-2, 3280 x 2464 pixel

RS庫存編號:: 913-2673
製造零件編號:: RASPBERRY PI NOIR CAMERA MODULE V2
製造商:: Raspberry Pi

可享批量折扣

小計（1 件）*

TWD780.00

(不含稅)

TWD819.00

訂單超過 $1,300.00 免費送貨

有庫存

116 件準備從其他地點送貨
加上 135 件從 2026年5月11日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 4	TWD780.00
5 - 9	TWD762.00
10 +	TWD752.00

* 參考價格

RS庫存編號:: 913-2673
製造零件編號:: RASPBERRY PI NOIR CAMERA MODULE V2
製造商:: Raspberry Pi

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Raspberry Pi
	Product Type	Camera Module
	Series	Pi NoIR
	Sub Type	Camera Module
	Number of Channels	1
	Supported Bus Interfaces	CSI-2
	Maximum Resolution	3280 x 2464 pixel
	Minimum Operating Temperature	-20°C
	Maximum Frame Rate	30fps
	Maximum Operating Temperature	60°C
	Height	9mm
	Length	23.86mm
	Width	25mm
	Standards/Approvals	RoHS, BS EN 61340-5-1:2007, ANSI/ESD S20.20:2014

	選取全部
	品牌 Raspberry Pi
	Product Type Camera Module
	Series Pi NoIR
	Sub Type Camera Module
	Number of Channels 1
	Supported Bus Interfaces CSI-2
	Maximum Resolution 3280 x 2464 pixel
	Minimum Operating Temperature -20°C
	Maximum Frame Rate 30fps
	Maximum Operating Temperature 60°C
	Height 9mm
	Length 23.86mm
	Width 25mm
	Standards/Approvals RoHS, BS EN 61340-5-1:2007, ANSI/ESD S20.20:2014

COO (Country of Origin):: GB

Raspberry Pi NoIR Bulk Camera Board V2

The Raspberry Pi NoIR board V2 camera module is single channel, 8 megapixels and supports CSI-2 bus interface. It has a maximum frame rate capture of 30fps. This high definition (HD) NoIR camera board connects to any Raspberry Pi or compute module, allowing you to create HD videos and still photographs. The Pi NoIR (No Infrared) is the same as the standard camera module but without an IR filter and thus it is great for photography and videography in the dark. It utilises the IMX219PQ image sensor from Sony, which offers high-speed video imaging and high sensitivity. It also offers reduced image contamination such as fixed pattern noise and smearing. To connect the NoIR camera module to pi, a 15cm ribbon cable is attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, we can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs.

Features and Benefits

15-pin ribbon cable

Automatic 50/60Hz luminance detection

Automatic black level calibration

Automatic exposure control, white balance and band filter

High data capability

High-quality imagery

No IR filter

Operating temperature ranges between -20°C and 60°C

Supports 1080p, 720p60 and VGA90

Applications

Ideal for capturing HD videos and still photographs at night

Monitoring plant health and nocturnal animals

Certifications

ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007