- RS庫存編號:
- 504-1242
- 製造零件編號:
- LM24A-S
- 製造商:
- Belimo
- RS庫存編號:
- 504-1242
- 製造零件編號:
- LM24A-S
- 製造商:
- Belimo
產品概覽和技術數據資料表
法例與合規
- COO (Country of Origin):
- CH
產品詳細資訊
Belimo Damper Actuator
The Belimo damper actuator has an open/close control type. This actuator has an adjustable U-clamp, which accepts round or square shafts. It is a rotary/louver actuator. It is compatible with all the leading makes of HVAC controls. The damper actuator is used for adjusting air dampers in ventilation and air-conditioning systems in the building. This actuator operates on stall torque technology, which does not require end switches. The damper actuator has no limit switches and is overload proof. It requires 24VAC/VDC supply voltage.
This actuator has an integrated 1xSPDT 3 (0.5)A 250Vac auxiliary switch.
This actuator has an integrated 1xSPDT 3 (0.5)A 250Vac auxiliary switch.
Features and Benefits
Operation life is minimum 60000
Pushbutton manual override
Direction change switch
Cable length is 1m
Ambient temperature ranges is between -30°C and 50°C
Rated impulse voltage is 0.8kV
Maintenance free
Power consumption is 1W
Maximum damper area is 1m²
Damper spindle compatibility is between 6mm and 20mm
Motor torque is 5Nm
Noise level is 35dB
Pushbutton manual override
Direction change switch
Cable length is 1m
Ambient temperature ranges is between -30°C and 50°C
Rated impulse voltage is 0.8kV
Maintenance free
Power consumption is 1W
Maximum damper area is 1m²
Damper spindle compatibility is between 6mm and 20mm
Motor torque is 5Nm
Noise level is 35dB
Certifications
IP54 rated
CE according to 89/336/EEC
92/31/EEC
UL Enclosure Type 2
IEC/EN 60730-1
IEC/EN 60730-2-14
CE according to 89/336/EEC
92/31/EEC
UL Enclosure Type 2
IEC/EN 60730-1
IEC/EN 60730-2-14
規格
屬性 | 值 |
---|---|
Maximum Damper Area | 1m² |
Damper Spindle Compatibility | 6 → 20mm |
Switch Included | Yes |
Power Consumption | 1W |
Control Type | Open/Close |
Supply Voltage | 24 V ac/dc |
Motor Torque | 5Nm |
Noise Level | 35dB(A) |
Maximum Damper Spindle Size | 20mm |
Minimum Damper Spindle Size | 6mm |