IMI Norgren PNEUFIT Series Elbow Threaded Adaptor, R 1/4 Male to Push In 6 mm, Threaded-to-Tube Connection Style
- RS庫存編號:
- 210-2388
- 製造零件編號:
- 101470628
- 製造商:
- IMI Norgren
5 現貨庫存,可於3工作日發貨。
已增加
單價(不含稅) 個 (每包:5個)
TWD221.20
(不含稅)
TWD232.26
(含稅)
單位 | Per unit | Per Pack* |
5 - 25 | TWD221.20 | TWD1,106.00 |
30 - 55 | TWD212.40 | TWD1,062.00 |
60 + | TWD203.40 | TWD1,017.00 |
* 參考價格 |
- RS庫存編號:
- 210-2388
- 製造零件編號:
- 101470628
- 製造商:
- IMI Norgren
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- GB
產品詳細資訊
IMI Norgren Threaded-To-Tube Elbow Adaptor, R1/4 Male To Push-In 6mm, Swivel Connection - PNEUFIT Series - 101470628
For straightforward assembly of a pneumatic circuit, choose this elbow adaptor from IMI Norgren. Its swivel function adds flexibility to your set-up as it can rotate in any direction. A non-PTFE (polytetrafluoroethylene) coating on the adaptor's threaded connector end ensures smooth insertion and eliminates the risk of any distortion under pressure. The other end's push-in connector allows for simple, tool-free assembly. Thanks to its wide operating pressure range of -0.9 to 18 bar, this device is suitable for use in both low-pressure and high-pressure systems.
Features & Benefits
• Nickel-plated brass body for durability and resistance corrosion
• Silicone-free O-rings for reduced risk of environmental contamination
• Right-angle orientation to fit into tight or awkward spaces
• Wide operating temperature range of -20°C to +80°C for use in demanding environments
• Silicone-free O-rings for reduced risk of environmental contamination
• Right-angle orientation to fit into tight or awkward spaces
• Wide operating temperature range of -20°C to +80°C for use in demanding environments
Applications
• Conveyor and assembly lines
• Air tools
• Controls and actuators
• Air tools
• Controls and actuators
How do I assemble and disassemble this adaptor?
When connecting this adaptor, you should first ensure that your tubing is burr-free. Then simply push the hose into the fitting until it bottoms on the tube-stop. To disconnect, push the tube into the fitting, hold down the collet and withdraw the hose.
規格
屬性 | 值 |
---|---|
Connector A | R 1/4 Male |
Connector B | Push In 6 mm |
Pneumatic Fitting Type | Elbow Threaded Adaptor |
Connection Style | Threaded-to-Tube |
Threaded Connection | R 1/4 Male |
Manufacturer Series | PNEUFIT 10 |
Thread Material | Nickel Plated Brass |
Angle | 90° |
Maximum Operating Temperature | +80°C |
Minimum Operating Temperature | -20°C |
Body Material | Nickel Plated Brass |
Swivel Connection | Yes |
Maximum Operating Pressure | 18 bar |