Schneider Electric 11 kW Soft Starter, 415 V ac, 3 Phase, IP20

Altistart Soft Start with Soft Stop - 400V

Created and designed to operate as a torque limiter on starting, or as a soft start or soft stop unit for asynchronous motors. This range of soft starters enhances the starting performance of asynchronous motors by allowing them to start smoothly, gradually and in a controlled manner. They are compact and easy to install, the Altistart 01 series can be mounted side by side.

Features & Benefits

Three phase input
Controlled deceleration

Note

Power ratings stated are for 3 phase 400V motors. Please refer to technical data sheet for further information.

ATS01N222QN Soft Starter

• The main function of this component type is to perform as a soft starter or soft stop for three-phase loads


• Forms part of the Altistart 01 product range


• Commonly referred to as ATS01


• Features a supply voltage of 380...415 V - 10...10 %


• The starter rating is 22 A


• Has a utilisation category of AC-53B conforming to EN/IEC 60947-4-2


• The current consumption is 110 A at nominal load


• Starts with a voltage ramp


• Power dissipation - 124.5 W in a transient state, 4.5 W at full load and at end of starting


• Dimensions - H154 mm X W45 mm X D131 mm


• 1 greed LED will display when the starter is powered up and 1 yellow LED will display when the nominal voltage has been reached