STMicroelectronics L298P, Brushed Dual Full Bridge Motor Driver, 46 V 4A 20-Pin, PowerSO

產品概覽和技術數據資料表
法例與合規
相容
產品詳細資訊

L298 Dual Bridge Motor Driver

The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected and the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.

Features

Operating supply voltage up to 46 V
Total DC current of up to 4 A
Low saturation voltage
Over-temperature protection
Logical "0" input voltage up to 1.5 V (high noise immunity)

Motor Controllers & Drivers, STMicroelectronics

規格
屬性
Motor Type Brushed DC
Output Configuration Dual Full Bridge
Maximum IGBT Collector Current 4A
Maximum Collector Emitter Voltage 46 V
Mounting Type Surface Mount
Package Type PowerSO
Maximum Operating Supply Voltage 46 V
Pin Count 20
Minimum Operating Supply Voltage 4.8 V
Inverter Power Rating 25W
Minimum Operating Temperature -25 °C
Maximum Operating Temperature +130 °C
Height 3.6mm
Dimensions 16 x 11.1 x 3.6mm
Length 16mm
Width 11.1mm
341 現貨庫存,可於6工作日發貨。
單價(不含稅) 毎管:31 個
TWD 132.00
(不含稅)
TWD 139.00
(含稅)
單位
Per unit
Per Tube*
31 - 31
TWD132.00
TWD4,092.00
62 - 93
TWD129.80
TWD4,023.80
124 - 279
TWD127.70
TWD3,958.70
310 - 589
TWD123.90
TWD3,840.90
620 +
TWD120.40
TWD3,732.40
* 參考價格