- RS庫存編號:
- 285-4187
- 製造零件編號:
- MQ10-60ANSKT0
- 製造商:
- Sick
當前暫無庫存,可於26/07/2024發貨,6 工作日送達。
單價(不含稅) 個
TWD2,732.00
(不含稅)
TWD2,868.60
(含稅)
單位 | 每單位 |
---|---|
1 + | TWD2,732.00 |
- RS庫存編號:
- 285-4187
- 製造零件編號:
- MQ10-60ANSKT0
- 製造商:
- Sick
產品概覽和技術數據資料表
法例與合規
- COO (Country of Origin):
- MY
產品詳細資訊
Overview
The MQB magnetic proximity sensors reliably detect permanent magnets through non-magnetic materials such as stainless steel, aluminium, plastic or wood. The MQB sensors feature a square, compact plastic housing that makes them easy to install.
These sensors are resistant to dust, heat and vibration, making them ideal for use in harsh environments.
At a glance
Type: 10 mm x 28 mm x 16 mm
Sensing ranges: up to 60 mm
Electrical configuration: DC, 3-wire
Enclosure rating: IP 67
Temperature range: –25 °C to +75 °C
Tough VISTAL™ housing
Reliable detection of permanent magnets through non-ferromagnetic materials such as stainless steel, aluminium, plastic or wood
Solves high-temperature applications by installing the permanent magnet in the high-temperature area and the sensor behind an insulated area
Sensing ranges: up to 60 mm
Electrical configuration: DC, 3-wire
Enclosure rating: IP 67
Temperature range: –25 °C to +75 °C
Tough VISTAL™ housing
Reliable detection of permanent magnets through non-ferromagnetic materials such as stainless steel, aluminium, plastic or wood
Solves high-temperature applications by installing the permanent magnet in the high-temperature area and the sensor behind an insulated area
Your Benefit
Short-circuit protection (pulsed)
Large sensing ranges ensure reliable switching, even with target position tolerances
Low-cost sensor solution saves installation time and costs
Compact plastic housing makes machine integration easy
Large sensing ranges ensure reliable switching, even with target position tolerances
Low-cost sensor solution saves installation time and costs
Compact plastic housing makes machine integration easy
Applications
Factory automation
Handling and assembly technology: Level monitoring for the adhesive cartridge
Handling and assembly technology: Level monitoring for the adhesive cartridge
規格
屬性 | 值 |
---|---|
Switch Shape | Rectangular |
Output Type | NPN |
Terminal Type | Threaded Connector |
Maximum Current | 200mA |
Maximum DC Voltage | 30V dc |
Switching Frequency | 1000Hz |
Length | 28mm |
Width | 10mm |
Maximum Operating Temperature | +75°C |
Minimum Operating Temperature | -25°C |
Dimensions | 10 x 28 x 16mm |
Depth | 16mm |