RS PRO Heat Shrink Tubing, Black 9mm Sleeve Dia. x 5m Length 3:1 Ratio
- RS庫存編號:
- 700-4539
- 製造商:
- RS PRO
6 "將在 2 工作日發貨 （本地庫存） "
955 在6 工作日內發貨 (海外庫存)
已增加
單價（不含稅） 1 管 5 套
TWD728.00
(不含稅)
TWD764.40
(含稅)
| Reel(s) | Per Reel | Per Metre* |
| 1 - 14 | TWD728.00 | TWD145.60 |
| 15 - 74 | TWD716.00 | TWD143.20 |
| 75 + | TWD589.00 | TWD117.80 |
| * 參考價格 | ||
- RS庫存編號:
- 700-4539
- 製造商:
- RS PRO
法例與合規
- COO (Country of Origin):
- CN
產品詳細資訊
RS PRO Flexible Polyolefin Heat Shrink Tubing, 3:1 Ratio,9mm x 5m
A high quality, easy to use general purpose heat shrink tubing made from flexible, flame retardant Polyolefin. Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable.
This heat shrinkable tubing has a low shrink temperature of just 70°C (minimum) and a high shrink ratio of 3:1 which means it shrinks from its original diameter of 9mm to a third of its size to 3mm. A perfect solution for covering irregular or awkward shapes
This heat shrinkable tubing has a low shrink temperature of just 70°C (minimum) and a high shrink ratio of 3:1 which means it shrinks from its original diameter of 9mm to a third of its size to 3mm. A perfect solution for covering irregular or awkward shapes
Features and Benefits
Polyolefin heat shrink tubing
9mm x 5m reel
High flexibility
High 3:1 shrinkage ratio, shrinks to a third of its original diameter
Flame retardant
Operating temperature range of -55 to +135°C
Low heat shrink temperature of 70°C (minimum)
Minimum full recovery temperature: 110°C
Excellent electrical insulation properties
Resistant to common fluids and solvents
Excellent abrasion resistance
What is Heat Shrink Tubing?
Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to protect and insulate the connection. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state. Larger shrink ratios are required to cover materials with a greater size variation.
How to use Heat Shrink Tubing
The diameter of the wire or cable is measured and the correct sized heat shrink tubing selected. A piece of the tube is cut to size which is long enough to cover the connection or joint after heating. This then slides onto the wire. After the cable or wire has been joined the piece of heat shrink shrinkable tube is moved over the joint and heated with a heat gun until it shrinks and forms a tight wrapping around the joint
What is Polyolefin Heat Shrink Tubing Used For?
This polyolefin heat shrinkable tubing is very versatile and is used in both commercial and industrial applications for protecting and sealing cable joints and in-line components such as disconnect terminals and wire splices.
It can also be used to carry out repairs on existing worn or torn cable or wiring insulation. The high 3:1 shrink ratio means this heat shrink tubing can cover larger, more irregular shapes, for instance, it can fit over a cable and the connector on the end to provide a fully sealed, protective covering to the joint. Applications include the following:
Electrical insulation
Environmental protection against moisture, dust, and chemicals.
Mechanical protection to wires and small parts from abrasion
Mechanical strain relief on cable and connector joints to prevent damage caused by flexing or bending
Bundling and organizing harness wires, cable, and tubing
Colour coded identification of cables, wires, and components
Why RS PRO?
RS PRO is the own brand of RS. The RS PRO Seal of Approval is your assurance of professional quality, a guarantee that every part is rigorously tested, inspected, and audited against demanding standards. Making RS PRO the Smart Choice for our customers.
Approvals
UL224 125 C File E35586; CSA File LR51368-2; CSA 400-1-9
規格
屬性 | 值 |
|---|---|
| Sleeve Diameter | 9mm |
| Colour | Black |
| Shrunk Diameter | 3mm |
| Sleeve Type | Heat Shrink |
| Adhesive Lined | No |
| Shrink Ratio | 3:1 |
| Sleeve Length | 5m |
| Material | Polyolefin |
| Operating Temperature Range | -55 → +135 °C |
| Flame Retardant | Yes |
| Halogen Free | No |
| Standards Met | UL |