Moulded in either flame retardant ABS or general purpose ABS plastic. 2-piece lap joint construction Designed to meet IP54 Extra deep top and shallow base sections Recessed area on top of case for keypads/displays, etc. Lid is secured with either Philips machine screws, threaded into tapped integral brass bushings (flame retardant version or self tapping screws (general purpose version) Base with moulded knockouts for wall mounting Top and base have 6 bosses for PCB mounting Tops have vertical card guides
Note
Flame retardant version carries a UL flammability rating of 94V-0.
SKF Stud Cam Follower, 10 mm ID, 22 mm OD - KR22-PPA
This stud-type cam follower from SKF is the ideal choice for when you need to convert rotary motion to linear motion. A thick-walled outer ring enables it to withstand high radial loads, while the crowned raceways ensure a long service life. There's a hexagonal recess at the end of the stud, so it can be mounted easily using a hex key. The internal flange ring accommodates axial loads caused by skews to prevent damage from skidding. Lubrication is simple thanks to the supplied grease nipples.
• For concentric ring slide and track system bearings • Operating temperature range of -30°C to +100°C • Bore size of 10 mm • Roller diameter of 22 mm • Roller length of 12 mm • Static load rating of 6700 N • Dynamic load rating of 5500 N
Application Information
• Cam mechanisms • Guideways • Conveying and linear guidance systems • Industrial equipment
What type of cage is used in this cam follower?
This cam follower uses polyamide 66 caging, which produces little friction and permits high speeds. In low lubrication conditions, the caging can reduce the risk of seizure and damage to other components in the system.
