Omron PCB Mount Force Guided Relay, 24V dc Coil Voltage, 10A Switching Current, 4PNO, DPST

10A, 6A Relays with Forcibly Guided Contacts - G7SA

The G7S-A relays are slimline with forcibly guided contacts with a 10 Amp rating for NO Contact and 6A for NC. They are available as six-pole types with two contact configurations. It can be soldered directly to a PCB or used together with the P7S socket for panel installations.

Forcibly guided contacts
10A at 240VAC and 10A at 24VDC for resistive loads
14 pins
800 Ω contact resistance
Reinforced insulation between inputs and outputs and poles
Sealing: unsealed
Operating temperature: -25 to 70C

Note

Stock number 584004 is Track Mounted Socket

Standards

Conforms to EN 50205

Approvals

UL, CSA

G7S-4A2B-E DC24 Slim High Switching Non-latching Relay.

The Omron G7S-4A2B-E DC24 slim design non-latching relay is a 6-pole standard relay which will assist you to avoid a hazardous machine status when it is used as part of an interlocking circuit. The relay can be track or back mounted using the correct sockets plus the terminals have been arranged for PCB. There is reinforced insulation between the inputs, outputs and poles.

Features and Benefits.

• Slim design.
• Standard relay.
• High-switching capacity.
• Forcibly guided contacts.
• Terminal arranged for easy PCB layout.
• Avoids hazardous machine status.
• Reinforced insulation.
• 6 Poles.
• Contact 4PST-NO (normally open), DPST-NC (normally closed).
• Rated voltage 24 V dc.
• Can be installed in any direction.

Coil Rating.

• Rated current 30 mA.
• Coil resistance 800 Ω.
• Max voltage 110% based on ambient temperature of 23°C.

Contact Rating.

• NO (normally open) rated load 10 A at 250 V ac, 10 A at 30 V dc.
• NC (normally closed) 6 A at 250 V ac, 6 A at 30 V dc.
• Rated carry current NO 10 A, NC 6 A.
• Switching voltage max 250 V ac, 30 V dc.
• Switching current max NO 10 A, NC 6 A.

Additional Features.

• Contact resistance 100 MΩ (max).
• Operating and release time 50 ms (max).
• Insulation resistance 100 MΩ (min).
• Dielectric strength between coil and contacts 2500 V ac, 50/60 Hz for 1 min.
• Dielectric strength between different poles 4000 V ac, 50/60 Hz for 1 min.
• Dielectric strength between contacts of the same polarity 1500 V ac, 50/60 Hz for 1 min.
• Vibration resistance – destruction 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude).
• Vibration resistance – malfunction 10 to 55 to 10 Hz, 0.375 mm single amplitude (0.75 mm double amplitude).
• Shock resistance – destruction 1000 m/s², malfunction 100 m/s².
• Failure rate (P Level) 5 V dc, 1 mA.
• Operating temperature – ambient -25°C to 70°C.
• Weight 65 g (approx.).

Track Mounting Socket.

• Part number P7S-14F-END stock number 548004.
• Continuous current 10 A.
• Dielectric strength 2000 V ac for 1 min between terminals.
• Insulation resistance 1000 MΩ (min).
• Weight 110 g (approx.).
• Use within ambient humidity of 20% to 85%.
• To connect use stranded wire 0.75 mm² to 1.5 mm² OR solid wire 1 mm² to 1.5 mm².
• Using this socket the release time will be longer due to the built in diode absorbing the coil surge.