Microchip MCP39F511-E/MQ Energy Meter IC, 10 bit, 28-Pin QFN

  • RS庫存編號 893-8271
  • 製造零件編號 MCP39F511-E/MQ
  • 製造商 Microchip
產品概覽和技術數據資料表
法例與合規
相容
產品詳細資訊

MCP39F511 Energy Measurement ICs

The MCP39F511 from Microchip is an integrated, single-phase power monitoring device that provides real-time measurement of input power and energy values for AC/DC power supplies. On-board are two Delta-Sigma Analogue-to-Digital Converters (ADCs), a 16-bit Calculation Engine, EEPROM and a flexible 2-Wire Interface. An integrated low-drift voltage reference, combined with the 94.5 dB of SINAD performance on each measurement channel, allows for better than 0.1% accurate designs across a 4000:1 dynamic range.

Features

Power monitoring accuracy capable of 0.1% error across 4000:1 dynamic range
Built-in calculations using a 16-Bit processing core measuring:
- Active, reactive and apparent Power
- Active and reactive energy accumulation
- True RMS current, RMS voltage
- Line frequency, power factor
Dedicated Zero Crossing Detection (ZCD) pin
Dedicated PWM output pin
Automatic event pin control through fast voltage surge detection
Fast calibration routines
2-wire UART with 115.2k baud rate
512 bytes user-accessible EEPROM through page read/write commands
Non-volatile on-chip Memory
Low-Drift Internal Voltage Reference: 10 ppm/°C typical
Extended Temperature Range -40°C to +125°C

Energy/Power Measurement - Microchip

規格
屬性
Resolution 10 bit
Mounting Type Surface Mount
Package Type QFN
Pin Count 28
Dimensions 5 x 5 x 0.95mm
Length 5mm
Width 5mm
Height 0.95mm
Maximum Operating Supply Voltage 3.6 V
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 2.7 V
Minimum Operating Temperature -40 °C
195 現貨庫存,可於6工作日發貨。
單價(不含稅) /個 (每包:5個)
TWD 87.80
(不含稅)
TWD 92.20
(含稅)
單位
Per unit
Per Pack*
5 - 5
TWD87.80
TWD439.00
10 - 20
TWD83.60
TWD418.00
25 - 95
TWD80.60
TWD403.00
100 +
TWD78.00
TWD390.00
* 參考價格
包裝方式: