SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes
- RS庫存編號:
- 131-1336
- 製造零件編號:
- 8.07.01 SWD Isolator
- 製造商:
- SEGGER
7 現貨庫存，可於6工作日發貨。
單價（不含稅） 個
TWD9,892.00
(不含稅)
TWD10,386.60
(含稅)
| 單位 | Per unit |
| 1 - 4 | TWD9,892.00 |
| 5 + | TWD8,903.00 |
- RS庫存編號:
- 131-1336
- 製造零件編號:
- 8.07.01 SWD Isolator
- 製造商:
- SEGGER
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
J-Link ARM SWD Isolator Board
The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.
Compatible Probes
J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM
Features
• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET
規格
屬性 | 值 |
|---|---|
| Accessory Type | Adapter |
| For Use With | J-Link Probes |