Knipex, 97 Crimping Die Set, Uninsulated Terminals

Set comprising a tool and quick-change magazine for standard crimp requirements
Magazine and inserts available individually as options
For solder-free electrical connections
Consistently high crimp quality thanks to precision profile and fine-stage automatic lock (unlockable)
Crimp pressure is precisely set in the factory (calibrated)
Ergonomically-shaped, two-colour multi-component holsters for single and two-handed operation
Simple and fast change of crimp profiles without additional tool
Changeable inserts are held securely in the tool
Changeable inserts stored securely and free from dirt in a rotary magazine
Rotary magazine with practical belt clip
All stressed parts from special steel, hardened and tempered in oil
Head bronzed, handles with two-colour multi-component holsters

Crimp tool with rotary magazine and 3 changeable inserts
Uninsulated open connectors (4.8 + 6.3 mm plug width), 0.5 → 6 mm²
Insulated cable lugs + connectors, 0.5 → 6 mm²
Wire end ferrules, 0.25 → 6 mm²

Crimp tool with rotary magazine and 5 change inserts
Uninsulated open connectors (4.8 + 6.3 mm plug width), 0.5 → 6 mm²
Insulated cable lugs + connectors, 0.5 → 6 mm²
Wire end ferrules, 0.25 → 6 mm²
Insulated cable lugs + connectors, 0.5 → 10 mm²
Uninsulated butt splices, 1.5 → 10 mm²

Die for Knipex MultiCrimp® 97 33 01 / 97 33 02 or RS 484-815

- Non-insulated open plug connectors from 0.5 to 6 mm² (plug width 4.8 + 6.3 mm)
- Insulated cable lugs, plugs and butt connectors between 0.5 and 6 mm².
- Insulated and non-insulated end sleeves from 0.25 to 6 mm².

The five interchangeable crimp dies in the round quick-change die compartment can be used in a wide range of applications:
- Non-insulated open cable entry male connectors from 0.5 to 6 mm² (plug width 4.8 + 6.3 mm)
- Insulated cable lugs, male connectors and butt connectors between 0.5 and 6 mm².
- Insulated and non-insulated end sleeves from 0.25 to 6 mm², and 10 / 16 and 25 mm².
- Non-insulated crimp lugs, tubular cable lugs and compression cable lugs in accordance with DIN 46234 and DIN 46235
- Non-insulated crimp lugs, butt connectors and pressure connectors in accordance with DIN 46341 and DIN 46267 from 0.5 to 10 mm²

The Knipex MultiCrimp® crimping tool offers 3 or 5 crimping tools depending on the MultiCrimp® part number chosen
Economical
Professional
Weight reduction.

Product maintenance

• To maintain proper operation and long service life, shafts and other moving parts should be lubricated regularly.


• Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.


• The setting of the crimping die ranges should also be checked.


• Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil.

Importance of high quality crimping
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the crimping of the insulation, which relieves vibration and stress. It is important that the electrical connection is gas-tight with no voids between the wire strands and the lug. If there are voids, corrosion can occur, causing resistance and excessive heat that damages the electrical connection. Using a good quality crimping tool will ensure a complete gas tight crimp, preventing future deterioration of the electrical connection and insulation failure