最近搜索

    Knipex, 97 Crimping Die Set, Phoenix-Contact module connector

    Knipex
    RS庫存編號:
    336-8113
    製造零件編號:
    97 49 44
    製造商:
    Knipex
    查看所有Crimping Dies
    當前暫無庫存,可於23/10/2023發貨,6 工作日送達。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    TWD8,199.00

    (不含稅)

    TWD8,608.95

    (含稅)

    單位Per unit
    1 - 4TWD8,199.00
    5 +TWD7,379.00
    RS庫存編號:
    336-8113
    製造零件編號:
    97 49 44
    製造商:
    Knipex

    產品概覽和技術數據資料表


    法例與合規

    不相容

    COO (Country of Origin):
    DE

    產品詳細資訊

    Crimp Die Set 97 49 44


    Crimp die set for system tool KNIPEX 97 43 200 (stock no. 336-8084)
    For rolled contacts, 0.14 → 1.5 mm2, AWG 25-16, PEW 12.52
    For roll crimping conductors and insulation in one operation
    Available bronzed, for installation in the system tool 97 43 200
    With three profiles for:
    0.14 → 0.25 mm2
    0.3 → 0.5 mm2
    0.75 → 1.5 mm2

    Crimp die set 97 49 44


    Knipex universal crimping die 97 43 200 / RS 336-8084

    For Phoenix-Contact module connectors from 0.14 to 1.5mm² - AWG 26 to 15.

    Dies are machined and engraved with the cable section
    The dies are fixed with a screw.

    Can be used with the Knipex 97 43 200 / RS 336-8084 universal crimping tool, which offers the following advantages :


    Interchangeable crimping dies
    One tool for almost 1,000 different crimps
    Virtually parallel crimping mechanism
    Consistently high crimping quality thanks to precision dies and forced locking mechanism (can be unlocked)
    Crimping pressure is precisely set at the factory (calibrated), adjustable
    Increased force due to lever transmission for less tiring work

    Features and benefits :


    Parallel crimping
    Precision machining to obtain a precise crimp that meets the manufacturer's technical specifications
    Over 1000 interchangeable dies.

    Weight: about 40g
    Special quality oil-hardened vanadium chrome electric steel

    Maintenance tips :


    Product maintenance
    • To maintain proper operation and long service life, shafts and other moving parts should be lubricated regularly.

    • Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

    • The setting of the crimping die ranges should also be checked.

    • Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.


    *Use a light non-mineral oil.

    Importance of high quality crimping
    When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the crimping of the insulation, which relieves vibration and stress. It is important that the electrical connection is gas-tight with no voids between the wire strands and the lug. If there are voids, corrosion can occur, causing resistance and excessive heat that damages the electrical connection. Using a good quality crimping tool will ensure a complete gas tight crimp, preventing future deterioration of the electrical connection and insulation failure.


    規格

    屬性
    Crimp Connector TypePhoenix-Contact module connector
    Terminal InsulationUninsulated
    Number of Ports3
    Series97
    For Use WithUniversal crimping plier - 97 43 200

    當前暫無庫存,可於23/10/2023發貨,6 工作日送達。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    TWD8,199.00

    (不含稅)

    TWD8,608.95

    (含稅)

    單位Per unit
    1 - 4TWD8,199.00
    5 +TWD7,379.00