- RS庫存編號:
- 606-1641
- 製造零件編號:
- 97 53 09
- 製造商:
- Knipex
6 在6 工作日內發貨 (海外庫存)
40 在6 工作日內發貨 (海外庫存)
已增加
單價(不含稅) 個
TWD9,301.00
(不含稅)
TWD9,766.05
(含稅)
單位 | Per unit |
1 - 4 | TWD9,301.00 |
5 + | TWD8,371.00 |
- RS庫存編號:
- 606-1641
- 製造零件編號:
- 97 53 09
- 製造商:
- Knipex
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- DE
產品詳細資訊
Automatic crimping tool for wire end ferrules from 0.08 to 16mm² with front access
Features and benefits
- For crimping wire end ferrules according to DIN 46228 Part 1 + 4
- Automatic adjustment to the desired ferrule size: no crimping errors due to using the wrong profile
- End sleeves are inserted into the pliers from the front
- Very comfortable to use thanks to its practical shape and light weight - in one profile
- With lever for setting the crimping range from 0.08 to 10 or 16.0 mm².
- Particularly suitable for all twin conductor ferrules up to 2 x 6 mm² or 2 x AWG 8
- High-quality repeat crimping thanks to integrated locking (automatic release mechanism)
- Crimping pressure precisely defined (calibrated) at the factory, also adjustable
- Optimum force transmission through lever for fatigue-reduced operation
- Low weight
- Compact design
- Ergonomic handles
- Capacities mm² / AWG : crimps from 0.08 to 10.0 mm² and 16.0 mm² or AWG 28 to 5
- Material: special grade chrome vanadium electrical steel, oil quenched
- Automatic adjustment to the desired ferrule size: no crimping errors due to using the wrong profile
- End sleeves are inserted into the pliers from the front
- Very comfortable to use thanks to its practical shape and light weight - in one profile
- With lever for setting the crimping range from 0.08 to 10 or 16.0 mm².
- Particularly suitable for all twin conductor ferrules up to 2 x 6 mm² or 2 x AWG 8
- High-quality repeat crimping thanks to integrated locking (automatic release mechanism)
- Crimping pressure precisely defined (calibrated) at the factory, also adjustable
- Optimum force transmission through lever for fatigue-reduced operation
- Low weight
- Compact design
- Ergonomic handles
- Capacities mm² / AWG : crimps from 0.08 to 10.0 mm² and 16.0 mm² or AWG 28 to 5
- Material: special grade chrome vanadium electrical steel, oil quenched
Typical applications
Crimping pliers can be used in many applications:
- Maintenance and repair
- Electrical installations
- Crimp shop
- Maintenance and repair
- Electrical installations
- Crimp shop
Product Maintenance
- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly.
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.
*Use a light non-mineral oil
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.
*Use a light non-mineral oil
規格
屬性 | 值 |
---|---|
Product Type | Crimp Tool |
Operation | Hand |
For Use With | Wire Ferrules |
Wire Size mm² | 0.08 → 16mm² |
Wire Size AWG | 28 → 6AWG |
Ratcheting | Yes |
Overall Length | 190 mm |