JAE Plier Crimping Tool for Crimp Contact

  • RS庫存編號 372-2135
  • 製造零件編號 M22520/1-01
  • 製造商 JAE
COO (Country of Origin): JP

JAE Ratchet Crimp Tool

A quality hand crimp tool for crimping circular connector contacts. This handy tool has a cycle controlled precision ratchet which prevents the tool being opened before the crimping action is completed. This feature ensures accurate and consistently high-quality crimps are achieved each time and prevents partial crimps. An 8 indent selector knob on the tool enables the correct crimp setting to be selected and a positioner guide locks the positioner firmly in place.

Features and Benefits

• Lightweight
• Wire size: 12-26 AWG
• 8-step selector knob for crimp depth selection
• Ratchet mechanism
• Interchangeable positioner compatible


• Positioners are not supplied with the tool and must be purchased separately.

Typical Applications:

• Maintenance & repair
• Electrical Installations
• Computer Interfacing
• Cable assemblies

How easy are they to use?

They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.

How do you maintain the product?

• There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Crimp Tool Type Plier
Crimp Connector Type Crimp Contact
Wire Size AWG 26 → 12AWG
2 在6 工作日內發貨 (海外庫存)
3 在4 工作日內發貨 (海外庫存)
單價(不含稅) 個
TWD 23,220.00
TWD 24,381.00
Per unit
1 - 2
3 +