- RS庫存編號:
- 673-8710
- 製造商:
- RS PRO
160 現貨庫存,可於6工作日發貨。
已增加
單價(不含稅) 個
TWD973.00
(不含稅)
TWD1,021.65
(含稅)
單位 | Per unit |
1 - 4 | TWD973.00 |
5 + | TWD801.00 |
- RS庫存編號:
- 673-8710
- 製造商:
- RS PRO
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- CN
產品詳細資訊
RS PRO Countersink 63 mm x 20.5 mm 1 Piece
If you need an easy way to install countersunk screws, choose this countersink drill bit from RS PRO. It creates a crater at the surface of a conventional drilled hole so you can fully embed your countersunk screws in a surface.
The shaft of the drill bit fits into your drill driver securely and is thick enough to withstand high-pressure drilling into dense materials. The hexagonal end cuts through the surface material and shaves away the edges as the end thickens out, leaving a smooth, clean hole.
The end has three flutes to reduce vibration for greater precision during use. Use this drill bit at slower speeds for extra steadiness and accuracy. You can also use it after regular drilling to remove tough burr distortions at the surface of the hole.
The shaft of the drill bit fits into your drill driver securely and is thick enough to withstand high-pressure drilling into dense materials. The hexagonal end cuts through the surface material and shaves away the edges as the end thickens out, leaving a smooth, clean hole.
The end has three flutes to reduce vibration for greater precision during use. Use this drill bit at slower speeds for extra steadiness and accuracy. You can also use it after regular drilling to remove tough burr distortions at the surface of the hole.
Features and Benefits
• Countersink drill bit type
• Countersink angle of 90º
• High-speed steel (HSS) material
• Three flutes
• One piece
• Head diameter of 20.5 mm
• Overall length of 63 mm
• Shank diameter of 10 mm
• Shank length of 42 mm
• Countersink angle of 90º
• High-speed steel (HSS) material
• Three flutes
• One piece
• Head diameter of 20.5 mm
• Overall length of 63 mm
• Shank diameter of 10 mm
• Shank length of 42 mm
規格
屬性 | 值 |
---|---|
Drill Bit Type | Countersink |
Head Diameter | 20.5mm |
Countersink Angle | 90° |
Number of Flutes | 3 |
Material | HSS |
Overall Length | 63 mm |
Number of Pieces | 1 |
Shank Diameter | 10 mm |
Shank Length | 42mm |