Eaton xStart Contactor, 110 V ac Coil, 4-Pole, 45 A, 11 kW, 4NO, 400 V ac
- RS庫存編號:
- 743-4977
- 製造零件編號:
- 109819 DILMP45-10(110V50HZ,120V60HZ)
- 製造商:
- Eaton
單價 個**
TWD4,187.00
(不含稅)
TWD4,396.35
(含稅)
6 現貨庫存,可於6工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
單位 | 每單位 |
---|---|
1 + | TWD4,187.00 |
** 參考價格
- RS庫存編號:
- 743-4977
- 製造零件編號:
- 109819 DILMP45-10(110V50HZ,120V60HZ)
- 製造商:
- Eaton
DILM Contactors, Single Phase
X Start is the latest generation of Contactors from Moeller, based on the tried and tested DIL series. This generation of modular Contactors benefit from the advances in technology for motor switching and control, which in turn gives the user a number of additional benefits.
Durable and able to handle all demands
Features immunity to interference and control circuit reliabililty even when used in conjumction with PLC's
Four normally-open main contacts
Features immunity to interference and control circuit reliabililty even when used in conjumction with PLC's
Four normally-open main contacts
DILM 580 A - 1400 A Contactors
These power contactors use vacuum technology which enables them to stay compact in size. The technology prevents the formation of open arcs and therefore the release of any switching gases allowing a tighter arrangement of the switchgear and smaller distances to the conductive structures.
Features and Benefits
Compatible with the SmartWire-DT® communication system
Identical sizes for AC and DC operated contactors
Minimised heat dissipation - energy saving
Direct Fieldbus connection
Integrated suppressor circuit for DC models
Suitable for up to 1,000 V
AC/DC wide-range coil
Low holding power
Utilisation category AC 1 and AC 3
Features immunity to interference and control circuit reliability even when used in conjunction with PLC's
Identical sizes for AC and DC operated contactors
Minimised heat dissipation - energy saving
Direct Fieldbus connection
Integrated suppressor circuit for DC models
Suitable for up to 1,000 V
AC/DC wide-range coil
Low holding power
Utilisation category AC 1 and AC 3
Features immunity to interference and control circuit reliability even when used in conjunction with PLC's
Typical Applications
This range of contactors can be used across a multitude of applications, users will commonly find these contactors being used within industrial settings such as factory automation, railway transportation, electrical systems, electric motor, lighting, and mechanical engineering.
How contactors operate?
Contactors, unlike relays, are specifically designed to connect to high current load devices. Used in larger-scale applications, a contactor is a switch that can be controlled remotely, specifically designed to switch a large amount of electrical power through its contacts. If a device has the ability to switch more than 15 amperes it is called a contactor. These devices also feature high coil voltages which is rare within relays.
Standards
IEC/EN 60947, VDE 0660, UL, CSA
Note
Eaton formerly known as Moeller
屬性 | 值 |
---|---|
Coil Voltage | 110 V ac |
Number of Poles | 4 |
Contact Voltage Rating | 400 V ac |
Contact Current Rating | 45 A |
Range | xStart |
Power Rating | 11 kW |
Normal State Configuration | 4NO |
Number Of Auxiliary Contacts | 1 |
Terminal Type | Screw |
Length | 85mm |
Width | 58mm |
Depth | 138mm |
Minimum Operating Temperature | -25°C |
Pole and Throw Configuration | 4P |
Maximum Operating Temperature | +60°C |