Kopex Reducer, Conduit Fitting, 32mm Nominal Size, M32 → M20, Brass
- RS庫存編號:
- 738-8304
- 製造零件編號:
- EX/M32-M20/R
- 製造商:
- Kopex
本地庫存暫不足，貨期請向RS查詢
已增加
單價（不含稅） 個 (每包:5個)
TWD228.60
(不含稅)
TWD240.03
(含稅)
| 單位 | Per unit | Per Pack* |
| 5 - 245 | TWD228.60 | TWD1,143.00 |
| 250 + | TWD217.60 | TWD1,088.00 |
| * 參考價格 | ||
- RS庫存編號:
- 738-8304
- 製造零件編號:
- EX/M32-M20/R
- 製造商:
- Kopex
產品概覽和技術數據資料表
法例與合規
- COO (Country of Origin):
- GB
產品詳細資訊
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Note
It is not recommended to use two adapters together (joined to each other).
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.
Kopex Ex-System
規格
屬性 | 值 |
|---|---|
| Nominal Size | 32mm |
| Fitting Type | Reducer |
| Thread Size | M32 → M20 |
| Material | Brass |
| IP Rating | IP66 |
| Series | EX/R |