TE Connectivity
- RS庫存編號:
- 441-4380
- 製造零件編號:
- URHR-3-CS-2065-0
- 製造商:
- TE Connectivity
950 現貨庫存，可於6工作日發貨。
已增加
單價（不含稅） 個 (每包:10個)
TWD469.70
(不含稅)
TWD493.18
(含稅)
| 單位 | Per unit | Per Pack* |
| 10 + | TWD469.70 | TWD4,697.00 |
| * 參考價格 | ||
- RS庫存編號:
- 441-4380
- 製造零件編號:
- URHR-3-CS-2065-0
- 製造商:
- TE Connectivity
法例與合規
- COO (Country of Origin):
- US
產品詳細資訊
Cable Clamp Heat Shrink Grommets
ShrinkHoop™ grommet (URHR) is a high ratio heat-shrinkable strain-relief grommet that can be placed over the cable assembly after the connector pinning operation is complete. Shrunk down, these rings are highly conformable and fill the space between the clamp-type connector assembly and the cable. Re-entry is a simple operation, simply soften the ShrinkHoop™ grommet by heating and enlarge the ring by inserting a non-metallic probe through the centre of the wire bundle. The grommet will remain enlarged on cooling, allowing wires to be added, removed or reworked. Once rework is completed, simply heat the grommet until it shrinks down again before positioning and clamping back into place.
High shrink ratio up to 20:1
No build-up taping or feeding wire through grommet
Re-expandable I.D. allows wire addition to a cable bundle
Temperature Rating (°C) -55 to +135
No build-up taping or feeding wire through grommet
Re-expandable I.D. allows wire addition to a cable bundle
Temperature Rating (°C) -55 to +135
Standards
MIL-I-81765/1 Type 1
Approvals
MIL - I - 81765/1 Type I