Arduino MKR ZERO (I2S Bus & SD for Sound, Music & Digital Audio Data)
- RS庫存編號:
- 169-7584
- Distrelec 貨號:
- 301-01-961
- 製造零件編號:
- ABX00012
- 製造商:
- Arduino
可享批量折扣
小計（1 件）*
TWD969.00
(不含稅)
TWD1,017.45
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 20 件準備發貨
- 加上 188 件準備從其他倉庫發貨
- 加上 14 件從 2026年1月07日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 9 | TWD969.00 |
| 10 - 24 | TWD953.00 |
| 25 + | TWD937.00 |
* 參考價格
- RS庫存編號:
- 169-7584
- Distrelec 貨號:
- 301-01-961
- 製造零件編號:
- ABX00012
- 製造商:
- Arduino
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Arduino | |
| Product Name | MKR ZERO (I2S Bus & SD for Sound, Music & Digital Audio Data) | |
| Kit Classification | Development Board | |
| Processor Part Number | ATSAMD21G18A | |
| 選取全部 | ||
|---|---|---|
品牌 Arduino | ||
Product Name MKR ZERO (I2S Bus & SD for Sound, Music & Digital Audio Data) | ||
Kit Classification Development Board | ||
Processor Part Number ATSAMD21G18A | ||
- COO (Country of Origin):
- IT
Arduino MKR ZERO
Arduino MKR ZERO is a popular educational development board which contains the ATMEL SAMD21 microcontroller. It is made to integrate the core's low power consumption and high performance. Learn about 32-bit application development. It allows you to play with music files and no additional hardware is required.
What can you find on Arduino MKR ZERO board?
• Onboard SD connector with SPI interface
• Additional I2C Port - which apart from SDA and SCL signals includes the GND and +5V power rails
• Onboard LED - connected to a dedicated pin (32)
• Vin pin - used to power the board with regulated 5V source
• 5V - it outputs from the board when powered from the USB connector or from the VIN pin of the board
• VCC pin - outputs 3.3V through on-board regulator
• LED ON - connected to the 5V input from either USB or VIN
• Charge LED - driven by the charger chip that monitors the current drawn by the Li-Po battery while charging
Features and Benefits
• 5V board power supply
• Li-Po single cell, 3.7V, 700mAh minimum battery
• DC Current for 3.3V/5V - 600 mA
• Circuit operating voltage of 3.3V - unlike any other Arduino board, this runs at 3.3V, therefore any higher voltage than that will damage the board
• 22 digital pins
• Flash memory of 256 KB and 8 KB for bootloader
• 32 KB SRAM
• Full speed USB device and embedded Host
Arduino MKR ZERO is a popular educational development board which contains the ATMEL SAMD21 microcontroller. It is made to integrate the core's low power consumption and high performance. Learn about 32-bit application development. It allows you to play with music files and no additional hardware is required.
What can you find on Arduino MKR ZERO board?
• Onboard SD connector with SPI interface
• Additional I2C Port - which apart from SDA and SCL signals includes the GND and +5V power rails
• Onboard LED - connected to a dedicated pin (32)
• Vin pin - used to power the board with regulated 5V source
• 5V - it outputs from the board when powered from the USB connector or from the VIN pin of the board
• VCC pin - outputs 3.3V through on-board regulator
• LED ON - connected to the 5V input from either USB or VIN
• Charge LED - driven by the charger chip that monitors the current drawn by the Li-Po battery while charging
Features and Benefits
• 5V board power supply
• Li-Po single cell, 3.7V, 700mAh minimum battery
• DC Current for 3.3V/5V - 600 mA
• Circuit operating voltage of 3.3V - unlike any other Arduino board, this runs at 3.3V, therefore any higher voltage than that will damage the board
• 22 digital pins
• Flash memory of 256 KB and 8 KB for bootloader
• 32 KB SRAM
• Full speed USB device and embedded Host