LCBSBM-10-01A2-RT, 15.9mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- RS庫存編號:
- 721-4710
- 製造零件編號:
- LCBSBM-10-01A2-RT
- 製造商:
- Essentra
5080 現貨庫存，可於6工作日發貨。
已增加
單價（不含稅） 個 (每包:40個)
TWD11.30
(不含稅)
TWD11.86
(含稅)
| 單位 | Per unit | Per Pack* |
| 40 - 360 | TWD11.30 | TWD452.00 |
| 400 - 760 | TWD11.00 | TWD440.00 |
| 800 - 1960 | TWD10.80 | TWD432.00 |
| 2000 + | TWD10.50 | TWD420.00 |
| * 參考價格 | ||
- RS庫存編號:
- 721-4710
- 製造零件編號:
- LCBSBM-10-01A2-RT
- 製造商:
- Essentra
法例與合規
- COO (Country of Origin):
- GB
產品詳細資訊
Miniature Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
規格
屬性 | 值 |
|---|---|
| Overall Height | 24.6mm |
| PCB Support Type | Adhesive-Backed Support |
| Body Height | 15.9mm |
| Support Base Dimensions | 12.7 x 12.7mm |
| PCB Hole Diameter | 3.18mm |
| PCB Thickness | 1.57mm |
| Material | Nylon |
| Support Base Length | 12.7mm |
| Support Base Width | 12.7mm |