LCBSB-12-01 ART, 19.1mm High Nylon PCB Support for 4mm PCB Hole, 17.8 x 17.8mm Base
- RS庫存編號:
- 580-017
- 製造零件編號:
- LCBSB-12-01 ART
- 製造商:
- Essentra
1750 現貨庫存，可於6工作日發貨。
已增加
單價（不含稅） 個 (每包:25個)
TWD24.30
(不含稅)
TWD25.52
(含稅)
| 單位 | Per unit | Per Pack* |
| 25 - 225 | TWD24.30 | TWD607.50 |
| 250 - 475 | TWD23.80 | TWD595.00 |
| 500 - 1225 | TWD23.20 | TWD580.00 |
| 1250 + | TWD22.60 | TWD565.00 |
| * 參考價格 | ||
- RS庫存編號:
- 580-017
- 製造零件編號:
- LCBSB-12-01 ART
- 製造商:
- Essentra
法例與合規
- COO (Country of Origin):
- GB
產品詳細資訊
Standard Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm
規格
屬性 | 值 |
|---|---|
| Overall Height | 29.3mm |
| PCB Support Type | Adhesive-Backed Support |
| Body Height | 19.1mm |
| Support Base Dimensions | 17.8 x 17.8mm |
| PCB Hole Diameter | 4mm |
| PCB Thickness | 1.57mm |
| Material | Nylon |
| Support Base Length | 17.8mm |
| Support Base Width | 17.8mm |