The FTDI Chip FT233HP/FT232HP is a Hi-Speed USB device with Type-C/PD 3.0 controller IC that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 1 independent channel compatible with the FT232H – Single Hi-speed USB to multipurpose UART/FIFO solution.
Supports PD Specification 3.0. 1 x USB PD 3.0 Port supports Dual Role Swap Function Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source. Type-C/PD Physical Layer Protocol. PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM. PD mode configuration through external EEPROM. Options to use external MCU controlling PD policy through I2C interface. Up to 8 Configurable PD GPIO pins support. External MCU support through I2C bus.
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
