- RS庫存編號:
- 401-686
- 製造商:
- RS PRO
- RS庫存編號:
- 401-686
- 製造商:
- RS PRO
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
RS PRO SPDT Toggle Switch, Latching, IP67, PCB Mounting
This SPDT (Single Pole Double Throw) switch allows a single current to control two electrical circuits. It's typically used in industrial machinery, assembly lines and vehicle panels to toggle between different modes of operation.
The switch features copper-alloy contacts with gold plating to ensure reliable connections. Plus, the contacts are resistant to damage from corrosion and rust. Epoxy-sealed through-hole terminals prevent breakage during soldering, so you securely mount it onto your PCB (Printed Circuit Board).
An O-ring seal on the brass actuator makes this switch waterproof and dust-tight. It has an Ingress Protection (IP) rating of IP67, which means the unit can be dropped into a body of water up to a metre deep for half an hour. This makes the switch especially suited for use in demanding applications like marine equipment and boating panels.
The switch features copper-alloy contacts with gold plating to ensure reliable connections. Plus, the contacts are resistant to damage from corrosion and rust. Epoxy-sealed through-hole terminals prevent breakage during soldering, so you securely mount it onto your PCB (Printed Circuit Board).
An O-ring seal on the brass actuator makes this switch waterproof and dust-tight. It has an Ingress Protection (IP) rating of IP67, which means the unit can be dropped into a body of water up to a metre deep for half an hour. This makes the switch especially suited for use in demanding applications like marine equipment and boating panels.
Features and Benefits
Actuator length of 6.1 mm
Brass actuator material
SPDT contact configuration
Contact current rating of 400 mA (milliampere) at 20 V (volts) DC
Gold contact material
Contact resistance of 20 mΩ
Ingress Protection (IP) rating of IP67
Operating temperature range of -30°C to +85°C
Mechanical life of 30000 cycles
PCB mounting type
RoHS (Restriction of Hazardous Substances) and lead-free standards met
Latching switch operation
Through-hole terminal type
Brass actuator material
SPDT contact configuration
Contact current rating of 400 mA (milliampere) at 20 V (volts) DC
Gold contact material
Contact resistance of 20 mΩ
Ingress Protection (IP) rating of IP67
Operating temperature range of -30°C to +85°C
Mechanical life of 30000 cycles
PCB mounting type
RoHS (Restriction of Hazardous Substances) and lead-free standards met
Latching switch operation
Through-hole terminal type
規格
屬性 | 值 |
---|---|
Contact Configuration | SPDT |
Switch Operation | On-On |
Contact Current Rating | 400 mA @ 20 V |
Mounting Type | PCB |
Terminal Type | Through Hole |
IP Rating | IP67 |
Actuator Length | 6.1mm |
Actuator Material | Brass |
Contact Material | Gold |
Contact Resistance | 20mΩ |
Minimum Operating Temperature | -30°C |
Maximum Operating Temperature | +85°C |
Standards Met | RoHS & Lead Free |
Mechanical Life | 30000Cycles |
Operating Temperature Range | -30 → +85°C |