Eaton 32A British Standard Fuse, A2, 550V ac, 73mm
- RS庫存編號:
- 413-377
- 製造零件編號:
- AAO32
- 製造商:
- Eaton
單價 個 (每包:5個)**
TWD270.00
(不含稅)
TWD283.50
(含稅)
145 現貨庫存,可於6工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
單位 | 每單位 | 每包** |
---|---|---|
5 + | TWD270.00 | TWD1,350.00 |
** 參考價格
- RS庫存編號:
- 413-377
- 製造零件編號:
- AAO32
- 製造商:
- Eaton
不適用
Cooper Bussman Bolted Tag Fuse - British Standard
Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.
Features & Benefits
• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88
Why use a slotted tag fuse?
A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.
AAO32 Bolted Tag Fuse
• Features a 32 A current rating
• Holds a 550 V ac voltage rating
• Sits within the GG application category
• Dimensions are: L85mm x D13.7 mm x H35.5mm
• A2 fuse size
• Holds a 550 V ac voltage rating
• Sits within the GG application category
• Dimensions are: L85mm x D13.7 mm x H35.5mm
• A2 fuse size
Features & Benefits
• Overall length of 85mm to fit into compact circuit designs
• Bolted offset tags for easy attachment to fuse holders
• Designed for type-2 coordinated applications to save downtime and improve safety
• Low resistance for higher sensitivity to current and voltage changes
• Bolted offset tags for easy attachment to fuse holders
• Designed for type-2 coordinated applications to save downtime and improve safety
• Low resistance for higher sensitivity to current and voltage changes
Is it possible to reuse this fuse after it breaks?
No, once an irregularity in voltage or current flow causes a fuse element to break, the whole fuse needs to be replaced immediately to keep your equipment safe to use and protected from damage.
Note
Eaton formerly known as Bussmann
屬性 | 值 |
---|---|
Current Rating | 32A |
Fuse Size | A2 |
Voltage Rating | 550V ac |
Fuse Standard | BS 88, IEC 269 |
Fixing Centres | 73mm |
Application Category | gG |
Tag Width | 8.7mm |
High Rupture Capacity | Yes |
Overall Length | 85mm |
Body Diameter | 13.7mm |
Tag Type | Bolted |
Tag Orientation | Offset |
Body Length | 35.5mm |
Body Height | 35.5mm |
Fuse Dimensions | 13.7 x 35.5mm |