- RS庫存編號:
- 194-7230
- 製造零件編號:
- KSR16-L0-08-10-18-16
- 製造商:
- INA
當前暫無庫存,可於03/06/2024發貨,6 工作日送達。
已增加
單價(不含稅) 個
TWD2,037.00
(不含稅)
TWD2,138.85
(含稅)
單位 | Per unit |
1 - 4 | TWD2,037.00 |
5 - 9 | TWD1,956.00 |
10 - 24 | TWD1,915.00 |
25 + | TWD1,873.00 |
- RS庫存編號:
- 194-7230
- 製造零件編號:
- KSR16-L0-08-10-18-16
- 製造商:
- INA
法例與合規
產品詳細資訊
INA roller chain idler sprocket units are guidance and return units for roller bush chains and roller chains. They can compensate for chain stretch resulting from operation and give smoother system running under high loads and speeds
The ready-to-fit units comprise sprockets and deep groove ball bearings or radial insert ball bearings. The sprockets are made from high strength steel, sintered iron or plastic (polyamide). Sprockets made from plastic give particularly smooth running and generate very little noise. Since the inner ring of the deep groove ball bearing is extended on both sides, no additional spacer rings are required
In series KSR..-B0, the inner ring is located on the shaft by means of a locking collar. The bearing bore of this series has a plus tolerance.
The ready-to-fit units comprise sprockets and deep groove ball bearings or radial insert ball bearings. The sprockets are made from high strength steel, sintered iron or plastic (polyamide). Sprockets made from plastic give particularly smooth running and generate very little noise. Since the inner ring of the deep groove ball bearing is extended on both sides, no additional spacer rings are required
In series KSR..-B0, the inner ring is located on the shaft by means of a locking collar. The bearing bore of this series has a plus tolerance.
規格
屬性 | 值 |
---|---|
Number of Teeth | 18 |
Bore Type | Parallel |
Maximum Bore Diameter | 16.2mm |
Pitch Diameter | 1/2in |
Material | Steel |
Sprocket Width | 18.3mm |