3M 7100260283 Yellow Polyvinyl Chloride 33 m Hazard Tape 0.14 mm Thickness

This hazard tape is a high-visibility marking product designed for identifying hazardous areas and guiding safe workflows in industrial settings. Its vinyl backing and rubber-based adhesive deliver a conspicuous, stickable barrier for temporary or semi-permanent floor and site marking within automation, electronics, electrical and mechanical workplaces.

• Vinyl backing provides Durable abrasion resistance and surface protection
• Rubber adhesive ensures Rapid initial tack to varied substrates
• Tensile strength of 24.5N/100mm delivers dimensional stability under load
• Elongation at break 130% allows stretching without tearing
• Operating range up to +76.66°C supports elevated-temperature environments
• Thickness 0.14mm offers a low-profile solution for floor applications

• Suitable for delineating machine exclusion zones on factory floors
• Ideal for temporary cable routing and maintenance barriers
• Used for marking test benches and assembly stations in electronics
• Can be used for on-site safety perimeters during mechanical works
• Suitable for colour-coding hazardous areas in electrical workshops

The product is supplied as 33 m per roll with a 50mm width to enable long run lengths and neat linear marking.

The rubber adhesive maintains contact on irregular surfaces, while the vinyl backing resists abrasion to preserve bond and visibility.

Application and service should consider a minimum ambient handling temperature of +4.44°C and suitability up to +76.66°C for service conditions.

The tape has a material thickness of 0.14mm, keeping it low profile for minimal trip hazard and clearance issues.

With a tensile strength of 24.5 N/100mm and 130% elongation, it resists tearing while allowing some stretch during installation.