最近搜索

    ABB 2TLA020070R5800 Pluto cable USB USB Cable for Pluto Safety Controller

    RS庫存編號:
    733-4833
    製造零件編號:
    2TLA020070R5800 Pluto cable USB
    製造商:
    ABB
    ABB
    查看所有Safety Automation Controllers
    2 "將在 2 工作日發貨 (本地庫存) "
    22 在6 工作日內發貨 (海外庫存)
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    TWD2,983.00

    (不含稅)

    TWD3,132.15

    (含稅)

    單位Per unit
    1 +TWD2,983.00
    RS庫存編號:
    733-4833
    製造零件編號:
    2TLA020070R5800 Pluto cable USB
    製造商:
    ABB

    法例與合規


    產品詳細資訊

    Pluto Safety PLC, Base Unit


    Pluto from ABB is an "All-Master" safety PLC concept, which simplifies the design of safety systems and achieves the highest safety category 4 according to EN 954-1. All Pluto's are Master units and can see the other Pluto's inputs, outputs and global memories. This enables the Pluto to evaluate the information from the other Pluto's and then take decisions concerning its own safety devices. The Gateway units are available for several different bus systems, i.e. Profibus (733-4836), CanOpen (733-4830), Devicenet (733-4849) and Ethernet (733-4842). Of Pluto's inputs (the smallest unit has 16 I/O), thus can be configured as either inputs or outputs. In the Pluto family by ABB most modules have dual safety outputs - potential free or PNP types. In a two-wire bus system up to 32 Pluto units can be safely connected and communicate with a superior system via a Gateway or HMI displays. Therefore within a maximum extended system 1472 I/O's can be connected. Also all input components may be connected in series for even more complexity and optimisation.


    Simple and easy programming facilities
    Easy to configure and install
    Up to 640 I/O's
    Multiple Plutos can be connected on a bus (via using the IDFIX identifier) and then further interfaced with external networks by using a Gateway, typical example RS stock number (733-4842)
    High safety level
    Free software available
    Programming over the bus
    35 mm DIN rail mounting
    The IDFIX (733-4824) is an identification circuit which allows multiple Plutos to be identified when connected on a bus system. This module is available to distribute a PLC program within a network of Pluto devices.
    Tina adapters such as (733-2477) can be used to connect external safety monitoring equipment


    Note

    The IDFIX device (733-4824) is connected between the input terminals ID and 0V (also note that the IDFIX device is not required when using a single Pluto, however the absense of an IDFIX requires to be stated when programming the Pluto device.)

    Approvals

    TUV, FS, CSA


    規格

    屬性
    Accessory TypeUSB Cable
    For Use WithPluto Safety Controller
    2 "將在 2 工作日發貨 (本地庫存) "
    22 在6 工作日內發貨 (海外庫存)
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    TWD2,983.00

    (不含稅)

    TWD3,132.15

    (含稅)

    單位Per unit
    1 +TWD2,983.00