SKF HK 5020 50mm I.D Needle Roller Bearing, 58mm O.D
- RS庫存編號:
- 513-723
- 製造零件編號:
- HK 5020
- 製造商:
- SKF
28 在6 工作日內發貨 (海外庫存)
22 在6 工作日內發貨 (海外庫存)
已增加
單價（不含稅） 個
原價 TWD606.00
您付款
TWD430.00
(不含稅)
TWD451.50
(含稅)
| 單位 | Per unit |
| 1 - 5 | TWD430.00 |
| 6 - 24 | TWD424.00 |
| 25 + | TWD419.00 |
- RS庫存編號:
- 513-723
- 製造零件編號:
- HK 5020
- 製造商:
- SKF
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- DE
產品詳細資訊
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
規格
屬性 | 值 |
|---|---|
| Inside Diameter | 50mm |
| Outside Diameter | 58mm |
| Roller Bearing Type | Needle |
| Race Width | 20mm |
| Bore Type | Parallel |
| Material | Metal |
| Static Load Rating | 63kN |
| Cage Material | Sheet Steel |
| Number of Rows | 1 |
| Dynamic Load Rating | 29.2kN |
| End Type | Open |
| Fatigue Limit Load | 7.8kN |
| Maximum Speed - Oil | 5600rpm |
| Maximum Speed - Grease | 4000rpm |