- RS庫存編號:
- 229-3658
- 製造零件編號:
- SRA200G/20-30
- 製造商:
- Sensata / Cynergy3
122 "將在 2 工作日發貨 (本地庫存) "
629 在6 工作日內發貨 (海外庫存)
已增加
單價(不含稅) 個
TWD151.00
(不含稅)
TWD158.55
(含稅)
單位 | Per unit |
1 + | TWD151.00 |
- RS庫存編號:
- 229-3658
- 製造零件編號:
- SRA200G/20-30
- 製造商:
- Sensata / Cynergy3
法例與合規
產品詳細資訊
Form A & C Reed Switches
Suitable for use with location sensors, proximity switches and level switches at low to medium voltages and current
Electrical Life 105 - 106 Switching Cycles
Mechanical Life 109 Operations
For suitable magnets, see stk. no 118-7108 typically
Electrical Life 105 - 106 Switching Cycles
Mechanical Life 109 Operations
For suitable magnets, see stk. no 118-7108 typically
Sensata Cynergy3 Reed Switch, SPNO, 55mm - SRA Series - SRA200G/20-30
Use this Sensata Cynergy3 reed switch with location sensors, proximity switches and level switches at low to medium voltages. Its compact design makes it ideal for applications where there isn't a lot of space available. The pin contacts on either end of the unit are a standard shape and size. This makes for quick and easy installation directly onto your printed circuit board (PCB). Once fitted, the pins create an airtight seal that stops dust from getting in and wearing the connection down. This contributes to the switch's reliable performance and long service life.
Features & Benefits
Rhodium contact material reduces wear, corrosion and heat damage for improved durability
SPNO (single pole, normally open) configuration allows the relay to complete the circuit and directly activate the reed switch
Fast 2.5ms operating time (including bounce) and a 0.5ms release time for high efficiency
SPNO (single pole, normally open) configuration allows the relay to complete the circuit and directly activate the reed switch
Fast 2.5ms operating time (including bounce) and a 0.5ms release time for high efficiency
Can I clean this reed relay?
As Sensata Cynergy3 reed relays don't come hermetically sealed as standard, it's not advisable to clean them with water-based solutions. If you need to clean your PCB after the relay has been soldered on, use an IPA (isopropyl alcohol) solution.
Approvals
7777
規格
屬性 | 值 |
---|---|
Contact Configuration | SP-NO |
Maximum Switching Current | 1A |
Maximum Switching Power | 12W |
Maximum Switching Voltage | 230V ac/dc |
Contact Resistance | 100mΩ |
Contact Material | Rhodium |
Maximum Release Time | 0.1ms |
Operating Time Including Bounce | 2.5ms |
AT Value Range | 20 → 50AT |
Width | 0.1in |
Length | 55mm |