onsemi, FOD8480TOS Optocoupler
- RS庫存編號:
- 195-8849
- 製造零件編號:
- FOD8480T
- 製造商:
- onsemi
當前暫無庫存，可於01/07/2024發貨，6 工作日送達。
已增加
單價（不含稅） 毎管：100 個
TWD49.20
(不含稅)
TWD51.66
(含稅)
| 單位 | Per unit | Per Tube* |
| 100 - 100 | TWD49.20 | TWD4,920.00 |
| 200 - 300 | TWD48.10 | TWD4,810.00 |
| 400 + | TWD47.10 | TWD4,710.00 |
| * 參考價格 | ||
- RS庫存編號:
- 195-8849
- 製造零件編號:
- FOD8480T
- 製造商:
- onsemi
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
The FOD8480 and FOD8482 are low power optocouplers, which support isolated interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without conducting ground loops or hazardous voltages.
The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.
The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.
The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.
The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.