IC output type Optocouplers, High-speed

產品概覽和技術數據資料表
法例與合規
相容
COO (Country of Origin): JP
產品詳細資訊

The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing an AlGaAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion with operating temperature. It is suitable for IPM drive. The PS9513L1 is lead bending type for long creepage distance. The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9513L3 is lead bending type (Gull-wing) for surface mounting.

Long creepage distance (8 mm MIN. : PS9513L1, PS9513L2)
High common mode transient immunity (CMH, CML = ±15 kV/μs MIN)
High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.)
Propagation Delay Difference (tPLH – tPHL = 270 ns TYP.)
Pulse width distortion (|tPHL – tPLH| = 270 ns TYP.)
Open collector output
Pb-Free product
APPLICATIONS
IPM Driver
General purpose inverter

規格
屬性
Mounting Type Surface Mount
Output Device Photodiode
Maximum Forward Voltage 2.1V
Number of Channels 1
Number of Pins 8
Package Type DIP
Typical Rise Time 520ns
Maximum Input Current 10 mA
Isolation Voltage 5 kVrms
Minimum Current Transfer Ratio 44%
Typical Fall Time 250ns
10 現貨庫存,可於4工作日發貨。
單價(不含稅) /個 (每包:2個)
TWD 100.5000
(不含稅)
TWD 105.5000
(含稅)
單位
Per unit
Per Pack*
2 - 8
TWD100.5000
TWD201.0000
10 - 18
TWD80.5000
TWD161.0000
20 - 38
TWD68.0000
TWD136.0000
40 +
TWD61.5000
TWD123.0000
* 參考價格