Amprobe Network Cable Tester Cable Tester BNC, RJ45, LAN-1

  • RS庫存編號 668-0841
  • 製造零件編號 LAN-1
  • 製造商 Amprobe
產品概覽和技術數據資料表
法例與合規
相容
COO (Country of Origin): TW
產品詳細資訊

LAN-1 LAN cable tester

Amprobe LAN-1 Cable Tester is designed to work with various data cables and connectors. This cable tester provides a quick go/no-go LED display of the wiring and connection of item under test.

Features and Benefits:

• Loopback test or remote test
• Buzzer sound for errors in the cable
• 300m maximum line length
• Approx. 20 hour battery life
• 2 sets of LED, signal and test

Frequently asked questions:

Tests pin configuration for 10/100 base –T, 10 base-2, RJ45 modular, AT&T 258A, EIA / TIA 568A/568B cables and Token Ring cables
Checks for continuity, interruptions, short circuits or incorrect connections
Tests installed cables or the patch panels by using the remote termination module
Performs loopback or remote tests
Buzzer sound warning for error condition
Two sets of LED lights for signal and test indication
Maximum cable length: >300 metres
Connectors: RJ45, BNC

What is a LAN cable tester?

LAN testers are devices that allow a user to verify and test a connection or signal within a data cable. The types of tests include whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable.

How do network cable testers work?

Usually made up of 2 sections or 2 boxes, a network cable tester will have a receiver and a transmitter. A cable is then connected directly or with connectors to both for testing. Once the tester is switched on a signal or data is sent via the cable and a report or the results are shown on the receiver. Receivers comes in a variety of types, shapes and sizes and therefore the results may vary in the way they are displayed. Some have LED's, some show patterns in lights and some different colours. The tester instruction manual will show what the results mean but some testers help determine the connection speed and detect problems.

What is the difference between RJ45 & RJ11?

RJ45 is an 8-pin connector whereas RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your house. RJ is the abbreviation of ’registered jack’.

Supplied with

Each unit is equipped with 3 RJ45/BNC adapter cables, a male/female BNC connector, 9 V battery and user manual.

規格
屬性
Equipment Type Cable Tester
Connector Type BNC, RJ45
Tone Yes
Power Source Battery
Battery Type 9V
Battery Life 20 h
Dimensions 130 x 56 x 38mm
Weight 1.3kg
Height 38mm
Length 130mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature 0°C
Model Number p LAN-1
Width 56mm
57 現貨庫存,可於6工作日發貨。
單價(不含稅) 個
TWD 3,462.00
(不含稅)
TWD 3,635.00
(含稅)
單位
Per unit
1 +
TWD3,462.00