Microchip Motor Control Kit for SAMD21 for Motor
- RS庫存編號:
- 144-6569
- 製造零件編號:
- ATSAMD21BLDC24V-STK
- 製造商:
- Microchip
此產品已停售
- RS庫存編號:
- 144-6569
- 製造零件編號:
- ATSAMD21BLDC24V-STK
- 製造商:
- Microchip
法例與合規
產品詳細資訊
ATSAMD21BLDC24V-STK BLDC Motor Control Kit
The ATSAMD21BLDC24V-STK is a low-voltage BLDC/PMSM motor control starter kit. The kit consists of a high-current driver board with sensing circuits and a plug-in ATSAMD21 microcontroller board.
ATBLDC24V Driver Board
• 6 x NTMFS5C646NL power MOSFETs configured as 3 x half-bridge drivers
• 3 x NCP5106A High-Side/Low-Side MOSFET gate drivers
• On-board AT25DF0181A 8Mb SPI Flash memory
• On-board AT30TSE758 I²C temperature sensor
• On-board UID Identification Chip
• Phase-current sensing for Field-Oriented Control (FOC)
• Support for Sensorless Back-EMF operation
• Support for Hall and Encoder sensor-based operation
• Over-voltage and over-current protection circuit
• 3 x LED Fault indicators
• Selectable MCU supply voltage
• 67-pin NGFF socket for MCU board
• Xplained PRO extension interface
• USB micro-B socket for connection to Main MCU
• USB micro-B socket for connection to EDBG MCU
• Screw connectors for +24V supply input
• Screw connectors for motor windings
• Screw connectors for encoder inputs
• Screw connectors for Hall sensor inputs
ATSAMD21MOTOR Microcontroller Board
• 48MHz ATSAMD21J18A Cortex-M0+ MCU with 256KB Flash memory, 32KB SRAM
• On-board debug (EDBG) circuit based on ATSAMD21J18A Cortex-M0+ MCU
• 10-pin Cortex DBG header
• Power and Status LEDs
• Reset switch
• Supported by the Atmel Studio integrated development platform
Supplied with
LDO BLDC motor (LDO: 42BL02402-0026B-002), Fully assembled chassis plate, 24Vdc @ 4A mains PSU (EDAC: EA11011E-240), USB cable.
Motor Controllers & Drivers, Microchip
規格
屬性 | 值 |
|---|---|
| For Use With | Motor |
| Kit Classification | Development Board |
| Featured Device | SAMD21 |
| Kit Name | Motor Control Kit |