Bosch Rexroth 0.8m Long Aluminium, Steel Round Shaft, 12mm Shaft Diam. , Hardness 60HRC, h6 Tolerance
- RS庫存編號:
- 161-2576
- 製造零件編號:
- R101401200, 800 MM
- 製造商:
- Bosch Rexroth
當前暫無庫存,可於11/06/2024發貨,6 工作日送達。
已增加
單價(不含稅) 個
TWD24,957.00
(不含稅)
TWD26,204.85
(含稅)
單位 | Per unit |
1 + | TWD24,957.00 |
- RS庫存編號:
- 161-2576
- 製造零件編號:
- R101401200, 800 MM
- 製造商:
- Bosch Rexroth
產品概覽和技術數據資料表
法例與合規
不適用
產品詳細資訊
Precision steel shaft with ready-mounted aluminium shaft support rails, flanged, extremely high height tolerance
For use with open Linear Bushings
For long guides or high loads where self-supporting shafts cannot be used due to shaft warping
Unlimited length when using interconnecting shafts
Support rails for various requirements
Additional degrees of freedom in circumferential direction compared to profiled guide rails.
For applications where other linear guides tend to warp due to imprecise substructure
Shaft support rail material: Aluminium
Combined with Linear Sets, these shaft support rails can be used to create linear guides with very low height.
Extra rigidity. Carefully adapting the support rail to the Linear Bushing size produces the ideal pressure angle for fitting the shaft which, along with the large fastening bolts, ensures extra rigidity.
For long guides or high loads where self-supporting shafts cannot be used due to shaft warping
Unlimited length when using interconnecting shafts
Support rails for various requirements
Additional degrees of freedom in circumferential direction compared to profiled guide rails.
For applications where other linear guides tend to warp due to imprecise substructure
Shaft support rail material: Aluminium
Combined with Linear Sets, these shaft support rails can be used to create linear guides with very low height.
Extra rigidity. Carefully adapting the support rail to the Linear Bushing size produces the ideal pressure angle for fitting the shaft which, along with the large fastening bolts, ensures extra rigidity.
規格
屬性 | 值 |
---|---|
Shaft Diameter | 12mm |
Length | 0.8m |
Material | Aluminium, Steel |
Type | Open Linear Shaft |
Hardness | 60HRC |
Tolerance | h6 |