Bare Conductive Touch Board Capacitive Touch Shield for Arduino

產品概覽和技術數據資料表
法例與合規
相容
產品詳細資訊

Touch Board

The Touch Board is an easy-to-use platform for a huge range of projects. Combine the Touch Board and Bare Conductive Paint and you can turn almost any material or surface into a capacitive or proximity sensor. You could paint a light switch on your wall, make a paper piano or trigger a sound via the onboard MP3 player. The number of touch-activated projects enabled by combining Touch Board with Electric Paint is only limited by the imagination.
Touch Board is an Arduino Shield-compatible processor board with extra features such as the 12-channel touch/proximity interface and an MP3 player. It appears as an Arduino Leonardo to the Arduino IDE for programming purposes.

ATMega32u4 16 MHz microcontroller, 32 KB Flash memory, 2.5 KB SRAM, 1 KB EEPROM
Bootloader uses 4 KB of Flash memory
MPR121 12-channel touch interface
VS1053B multi-format audio CODEC
Arduino Rev 3 Shield compatible (check pins available)
20 x GPIO pins maximum
7 x PWM channels
12 x analogue input channels
12 x Touch electrodes of which 8 can be configured as extra GPIO with PWM capability
Power supply: +5 Vdc (automatic voltage selector for USB or battery operation)
Built in LiPo battery charger with status LED
microSD card slot
3.5 mm audio out jack socket
microUSB socket
External power socket
Reset pushbutton
Power slide switch
Dimensions: 84 x 62 x 10 mm
Arduino compatible (recognised as an Arduino Leonardo in IDE)
Getting Started guide available online at: http://www.bareconductive.com/make/introducing-the-touch-board/

Note

Electric Paint: 50ml jar RS Part No. 835-2693 and 10ml tube RS Part No. 835-2699

Bare Conductive Touch Board

The Bare conductive touch is a microcontroller board with a dedicated capacitive touch and MP3 decoder ICs. It has a headphone socket and micro SD card holder (for file storage), as well as, 12 capacitive touch electrodes. This device is based around the ATmega32U4 and runs at 16MHz from 5V. It has a micro USB connector, a JST connector for an external lithium polymer (LiPo) cell, a power switch, and a reset button. This device resembles the Arduino Leonardo board and can be programmed using the Arduino IDE. The ATmega32U4 can appear to a connected computer as a mouse or a keyboard, (HID) serial port (CDC), or USB MIDI device.NoteElectric Paint: 50ml jar RS Part No. 835-2693 and 10ml tube RS Part No. 835-2699

Features and Benefits

12 x analogue input channels 12 x touch electrodes of which 8 can be configured as extra GPIO with PWM capability 20 x GPIO pins maximum 3.5 mm audio out jack socket 7 x PWM channels Arduino compatible (recognised as an Arduino Leonardo in IDE) Arduino Rev 3 shield compatible (check pins available) ATMega32u4 16 MHz microcontroller, 32 KB flash memory, 2.5 KB SRAM, 1 KB EEPROM Bootloader uses 4 KB of flash memory Built in LiPo battery charger with status LED Easy-to-use platform External power socket MicroSD card slot MicroUSB socket Power slide switch Reset pushbutton VS1053B multi-format audio CODEC

Applications

By combining the touch board and bare conductive paint and we can turn almost any material or surface into a capacitive or proximity sensor Painting a light switch on your wall or making a paper piano or triggering a sound via the onboard MP3 player Touch-activated projects enabled by combining touch board with electric paint

Certifications

ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007

規格
屬性
User Interface Capacitive Touch
For Use With Arduino
Kit Classification Shield
Kit Name Touch Board
10 現貨庫存,可於4工作日發貨。
單價(不含稅) 個
TWD 3,104.00
(不含稅)
TWD 3,259.00
(含稅)
單位
Per unit
1 +
TWD3,104.00