Petzl Lanyard Nylon, Polyester

  • RS庫存編號 136-3789
  • 製造零件編號 L71AA 40
  • 製造商 Petzl
COO (Country of Origin): FR

Petzl ASAP'SORBER Lanyard With Energy Absorber

Petzl ASAP’SORBER is a lanyard complete with an energy absorber that connects to an ASAP or an ASAP LOCK mobile fall arrestor. The ASAP’SORBER enables you to work at a distance from the rope providing extra protection. The energy absorber is protected in a zippered pouch protecting it from an abrasion plus is a tearing energy absorber. There are 2 choices of length for the lanyard so you can assess the required distance from the rope reducing the fall length.


Lanyard with energy absorber Connects ASAP or an ASAP LOCK mobile fall arrestor to the harness
Distance yourself from the rope allowing decluttering of work area and protecting the rope
Absorbs energy of a fall by tearing of stitching
Zippered fabric pouch protects the energy absorber from abrasion and harmful splashes
Pouch allows regular absorber inspection
Ends have STRING holding connector in position protecting webbing from abrasion
Available in 2 lengths – choose balance of distance from rope reducing the fall length


L71AA 20 Made from Nylon, Polyester
Length of sling – 20 cm
Weight – 75 g
L71AA 40
Made from Nylon, Polyester
Length of sling – 40 cm
Weight – 105 g


CE EN 355, EAC

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:


existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Material Nylon, Polyester