Safety Harness Kit Miller By Honeywell 1031433 Containing Bag, Harness, Lanyard-2m, Shock-Absorbing Lanyard

產品概覽和技術數據資料表
法例與合規
不適用
COO (Country of Origin): SK
產品詳細資訊

PSS Titan Scaffolding Kit

The Titan scaffolding kit is a complete kit which provides the protection needed when working on scaffolding. The kit consists of a 1 point Titan harness with a dorsal D-ring and Titan 2 m shock absorbing lanyard.

HARNESS:

Blue with black line webbing
Polyester webbing 45 mm
Dorsal D-ring made from stainless steel
Fast release buckles made from galvanised steel
Static test 15 KN
Standard EN 361

SHOCK ABSORBING LANYARD 2 m:

Made from polyester
Width 30 mm

SHOCK ABSORBER / SCAFF HOOK:

SHOCK ABSORBER:
Made from polyamide
34 mm wide

SCAFF HOOK:
Made from steel
Opening off 63 mm

KARABINERS:

Made from galvanised steel
Opening of 18 mm
Breaking strength 15 KN
Standards EN 355

Standards

EN 361, EN 355

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

規格
屬性
Application Scaffolding
Kit Weight Capacity 100kg
Harness Attachment Point Rear
Adjustable Straps Chest, Leg
Connecting Element Single Leg Lanyard
Connecting Element Length 2m
Anchorage Sling No
Bag Included Yes
4 在6 工作日內發貨 (海外庫存)
8 在6 工作日內發貨 (海外庫存)
單價(不含稅) 整套:1 個
TWD 3,331
(不含稅)
TWD 3,498
(含稅)
Kit(s)
1 +
TWD3,331