RS PRO Surface ESD Tester

  • RS庫存編號 776-8318
  • 製造商 RS PRO
產品概覽和技術數據資料表
法例與合規
豁免
COO (Country of Origin): US
產品詳細資訊

Analogue Surface Resistance Test Kit

The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 10 ohms.

Analogue compliance verification surface resistance checker
Automatic test range voltage selection compliance verification required by EN 61340-5-1
Portable operation with 9 Volt battery
LED Illuminates when battery power is low

Supplied with

1 Analogue surface resistance meter, 1x 9V alkaline battery, 2 shielded test leads, 2x 2.27 kilograms electrodes, 1 plastic Carrying Case, 1 certificate of calibration

RS Pro Surface ESD Tester Description

The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 105 ohms.

ESD protected area products should be tested:
A. Prior to installation to qualify for listing in user’s ESD control plan. Approved ESD materials (see product qualification EN-61340-5-1 Table 3 - EPA Requirements)
B. During initial installation
C. For periodic checks of installed products as part of EN-61340-5-1 Compliance Verification testing per Table 3 - EPA Requirements.

Contents

1 x Analogue Surface Resistance Meter
1 x 9V Alkaline Battery
2 x Shielded Test Leads
2 x 2.27 kilograms Electrodes
1 x Plastic Carrying Case
1 x Certificate of Calibration

Specifications

Accuracy: +/- 1/2 decade
Meter: 0.2 kg
Kit: 5.4 kg
Meter: 11.4cm L x 7.1cm W x 5.3cm H
Plastic Carrying Case: 24.1cm L x 30.5cm W x 8.9cm H
Power Supply: 9V alkaline battery

規格
屬性
Equipment Type Analogue Surface Resistance Test Kit
Power Source Battery
Test Point Surface
Supply Voltage 9V
Depth 241 mm
Height 89 mm
Display Type Analogue
Width 305mm
Complies with EN 61340-5-1 Yes
當前暫無庫存,可於05/11/2019發貨,6 工作日送達。
單價(不含稅) 個
TWD 20,922
(不含稅)
TWD 21,968
(含稅)
單位
Per unit
1 +
TWD20,922