Aoip Instrumentation CP-6632 Current & Voltage Calibrator 0 → 25 mA

產品概覽和技術數據資料表
法例與合規
不適用
COO (Country of Origin): FR
產品詳細資訊

CP6632 voltage / current calibrator

Voltage / current calibrator for process loops.
Current simulations from 0 → 25 mA with 24 V loop power supply and voltage from 0 → 15 V.
Current measurement from 0 → 25 mA with 24 V loop power supply and voltage from 0 → 50 V.
Continuity test.
Compatible with HART transmitters.
Calibration of transmitters, on-site measurements, integrated valve test.
Scaling in units and in % for easy reading of data with double display for 4 → 20 mA and 0 → 10 V process signals.
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.
Graphic display on screen with date and time, backlit with adjustable contrast. Selectable display resolution of up to 0.001 mA or 0.001 V.
Display of measurement statistics: Min, Max and Average.
Impact proof sheathing.
USB socket for downloading.
Supplied with measurement cables.

Note

Powered by 4 AA batteries or by using battery charger kit (this has EU not UK plug) available separately: AN6011 5083757

Aoip Instrumentation Current and Voltage Calibrator

The Aoip Instrumentation current and voltage calibrator is an accurate handheld instrument for process signals (150 ppm reading accuracy). This device measures or generates process current and voltage. It has a current measurement from 0mA to 25mA with 24V loop power supply and voltage from 0V to 50V. The calibrator is robust and easy-to-use. This tool has been designed to make maintenance operations easier on sensors and transmitters using process signals such as 4-20mA or 0-10V. The instrument is adapted to the various process installations due to scaling function and specific ranges. It is responsible for simulating ramps, steps, and fixed values to control process transmitters, panel meters and recorders.

Features and Benefits


Voltage/ current calibrator for process loops.
• Current simulations from 0mA to 25mA with 24V loop power supply and voltage from 0V to 15V
• High accuracy 0.015% reading with an adjustable resolution of 1mV and 1μA
• Values displayed in A, mV and, %
• Low temperature coefficient: 15ppm/°C in voltage and 20ppm/°C in current
• Active or passive loop power supply
• Measurements with HOLD function
• Simulation of ramps, pre-programmed steps and synthesiser values
• Display of minimum, maximum and average value
• Delivered with 4 alkaline AA batteries in standard
• Backlight enabled
• Continuity test
• Compatible with HART transmitters
• Impact proof sheathing
• USB socket for downloading
• Supplied with measurement cables

Applications


Electrical servicing and maintenance
• Laboratories
• Electronic servicing and maintenance
• Industrial automation

Certifications


IP45 rated
• EN 61010-1
• EN 61000-4-2
• EN 61000-4-3
• EN 61000-4-5
• EN 61000-4-6
• EN 61000-4-11
• EN 61000-3-2
• EN 61000-3-3
• EN 55022, class B

規格
屬性
Absolute Maximum Voltage Measurement 50V
Absolute Maximum Current Measurement 25mA
Best Accuracy ±0.015 %
Power Source Battery
Battery Type AA
Dimensions 157 x 85 x 45mm
Weight 306g
Height 45mm
Length 157mm
Maximum Operating Temperature +50°C
Maximum Source Current 25mA
Minimum Operating Temperature -10°C
Safety Category Level CAT II
Minimum Source Voltage 0V
Width 85mm
Safety Category Voltage 60V
Minimum Source Current 0mA
Maximum Source Voltage 15V
Model Number p CP-6632
現貨庫存,可於4工作日發貨。
單價(不含稅) 個
TWD 22,782.00
(不含稅)
TWD 23,921.00
(含稅)
單位
Per unit
1 +
TWD22,782.00