- RS庫存編號:
- 611-6325
- 製造零件編號:
- 05286
- 製造商:
- EXACT
5 在6 工作日內發貨 (海外庫存)
3 在6 工作日內發貨 (海外庫存)
已增加
單價(不含稅) 個
TWD3,247.00
(不含稅)
TWD3,409.35
(含稅)
單位 | Per unit |
1 + | TWD3,247.00 |
- RS庫存編號:
- 611-6325
- 製造零件編號:
- 05286
- 製造商:
- EXACT
法例與合規
不適用
- COO (Country of Origin):
- DE
產品詳細資訊
Sheet metal hole cutter, spiral tap, TiAlN
HSS hole cutter with spiral tap
TiAlN coating, for particularly tough materials
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, CrNi steel, non-ferrous metals, plastic, plexi glass and wood up to 5 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
TiAlN coating, for particularly tough materials
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, CrNi steel, non-ferrous metals, plastic, plexi glass and wood up to 5 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
Warning
Not suitable for aluminium. Use without cooling agents.
Supplied with
Set, stock no. 499-302 contains 1 x 4 → 20 mm hole cutter and 1 x 5 → 31 mm
規格
屬性 | 值 |
---|---|
Drill Bit Type | Cone Cutter |
Material | HSS |
Minimum Head Size | 5mm |
Maximum Head Size | 31mm |