最近搜索

    Texas Instruments Development Kit USB-TO-GPIO

    RS庫存編號:
    162-8466
    製造零件編號:
    USB-TO-GPIO
    製造商:
    Texas Instruments
    Texas Instruments

    此圖片僅供參考,請參閲產品詳細資訊及規格

    查看此類別
    4 現貨庫存,可於6工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個 (以毎盒:4)

    TWD5,018.50

    (不含稅)

    TWD5,269.42

    (含稅)

    單位Per unitPer Box*
    4 +TWD5,018.50TWD20,074.00
    * 參考價格
    RS庫存編號:
    162-8466
    製造零件編號:
    USB-TO-GPIO
    製造商:
    Texas Instruments
    COO (Country of Origin):
    MY

    產品概覽和技術數據資料表


    法例與合規

    COO (Country of Origin):
    MY

    產品詳細資訊

    USB Interface Adapter Evaluation Module


    Texas Instruments USB-TO-GPIO USB Interface Adapter Evaluation Module serves as an interface adapter or a bridge between a host PC (IBM™ compatible) and one or multiple slave devices via a standard type-A to mini-B USB cable. The communication between the USB interface adapter and the host PC is via USB, while the communication between the USB interface adapter and the slave device(s) is via an inter-integrated circuit (I²C), SMBus, PMBus and/or general-purpose inputs/outputs GPIOs. The bridge converts communication transactions between the USB and serial protocol.


    Supports master mode I²C, SMBus or PMBus as well as GPIO.
    Supports USB1.1 full speed at 12 Mbit/s. The USB interface adapter is recognized by the host as a generic human interface device (HID), so no proprietary USB or HID driver is needed. Therefore, the USB interface adapter can be treated as a USB plug-and-play device.
    Selects different clock speeds (either 100 kHz or 400 kHz) for I²C, PMBus, or SMBus communications.
    Configures different pullup resistors for clock, data and ALERT signals (including open-drain).
    Supports flexible I²C read or write transactions (specify raw data, instead of device address, command, etc.) .
    Includes .NET DLL for supporting Windows .NET GUIs using the adapter.
    No Windows dependencies other than the Microsoft .NET Framework version 2.0



    The IEEE 1149.1 standard test access port and boundary-scan architecture uses devices known by the JTAG acronym, from Joint Test Action Group, and is used for testing and debugging system ports and PCB assemblies. Most embedded systems employ JTAG ports to enable in-circuit debugging and firmware programming, in addition to boundary scan testing.


    規格

    屬性
    Kit ClassificationDevelopment Kit
    4 現貨庫存,可於6工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個 (以毎盒:4)

    TWD5,018.50

    (不含稅)

    TWD5,269.42

    (含稅)

    單位Per unitPer Box*
    4 +TWD5,018.50TWD20,074.00
    * 參考價格