LPRS easyRadio RF Transceiver Breakout Board for eRA and eRIC Modules eRIC9-BOB

Two breakout board modules which enable the testing and evaluation of the LPRS eRIC4 and eRIC9 RF Transceivers. The modules ’breaks out’ the 5 x 7 pins of the easy Radio Intelligent Controllers eRIC4 and eRIC9 to a more convenient 2 x 12 x 0.1’’pitch DIL pinout that matches commercial prototype breadboards.
Two versions of the breakout module are available:
• eRIC4-BOB (RS 136-7688) operates at 434 MHz and is intended for UK/European use.
• eRIC9-BOB (RS 136-7689) operates at 868 and 915 MHz and is suitable for European/US use.
A supplied jumper with the eRIC9-BOB optionally connects the Frequency Select Pin (14) to 0V setting the base operating frequency to 915MHz and restricting operation to meet FCC (USA) requirements.

• Size: 67 x 20 x 5mm
• Pinout: 2 rows of 12 x 0.1’’ pitch, spaced at 0.5"
• Antenna connection: SMA Jack connector or on-board eRIC UFL RF connector

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.

Wireless Modules - Low Power Radio Solutions