RS PRO Brass Filling Loop 15mm, 10 bar
- RS庫存編號:
- 242-2842
- 製造商:
- RS PRO
19 現貨庫存，可於6工作日發貨。
已增加
單價（不含稅） 個
TWD981.00
(不含稅)
TWD1,030.05
(含稅)
| 單位 | Per unit |
| 1 - 4 | TWD981.00 |
| 5 + | TWD808.00 |
- RS庫存編號:
- 242-2842
- 製造商:
- RS PRO
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- CN
產品詳細資訊
RS PRO Filling Loop
Use this RS PRO filling loop to connect to your water feed during filling and pressurising of domestic central heating system. During application, they must be installed between the mains cold water supply inlet and the central heating return pipe in the boiler, also used to fill and pressurise the secondary heating system of Heat Interface Units (HIUs).
Features and Benefits
- Maximum inlet pressure: 10 bar
- Maximum continuous temperature 85 °C
- WRAS-approved backflow prevention device (a double check valve conforming to BS EN 13959 suitable for protection against a fluid category 3 risk)
- Temporary connecting pipe (removable flexible hose)
- Service valve (2 isolating ball valves)
Components Parts
- Ball Valve
- Flexible braided hose
- Double check valve with integral isolation valve
Important
The filling loop must be installed in accordance with the requirements of the Water Regulations-1999, Schedule 2, Section 8 Paragraphs G24.1 and G24.2.
Applications
Domestic central heating system
規格
屬性 | 值 |
|---|---|
| Body Material | Brass |
| Maximum Working Pressure | 10 bar |
| Thread Size | 15mm |