Cartridge Heater, 1.5in, 175 W, 230 V ac
- RS庫存編號:
- 374-2347
- 製造零件編號:
- H1/4X1,5X175
- 製造商:
- Acim Jouanin
17 在6 工作日內發貨 (海外庫存)
54 在6 工作日內發貨 (海外庫存)
已增加
單價（不含稅） 個
TWD1,882.00
(不含稅)
TWD1,976.10
(含稅)
| 單位 | Per unit |
| 1 - 4 | TWD1,882.00 |
| 5 - 9 | TWD1,831.00 |
| 10 + | TWD1,785.00 |
- RS庫存編號:
- 374-2347
- 製造零件編號:
- H1/4X1,5X175
- 製造商:
- Acim Jouanin
產品概覽和技術數據資料表
法例與合規
- COO (Country of Origin):
- FR
產品詳細資訊
Acim Jouanin Cartridge Heater
The Acim Jouanin 175W cartridge heater has a diameter of 6.35mm(1/4in) and length of 38.1mm(1/5in). It provides localised heat to a restricted work area requiring close thermal control. The cartridge heater has low/moderate watt density elements consisting of helical wire coils on ceramic former. It can also have high watt density elements with the heating element located close to the sheath that is swaged to improve heat conduction.
Features and Benefits
Ceramic end cap protecting the connection leads
Lead length is 250mm
Plasma-welded completely sealed base
Stainless steel body for applications up to maximum 750°C
Supply voltage is 230V
Very quickly raises the temperature of solid masses by conduction
Watt density is 34W/cm²
Lead length is 250mm
Plasma-welded completely sealed base
Stainless steel body for applications up to maximum 750°C
Supply voltage is 230V
Very quickly raises the temperature of solid masses by conduction
Watt density is 34W/cm²
Applications
Food production
HVAC compressors
Immersion tank heating
Injection moulding manifolds
Mass spectrometry
Rubber moulding
Seal bars
Torpedo heaters for injection moulding
HVAC compressors
Immersion tank heating
Injection moulding manifolds
Mass spectrometry
Rubber moulding
Seal bars
Torpedo heaters for injection moulding
Certifications
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
BS EN 61340-5-1:2007
規格
屬性 | 值 |
|---|---|
| Element Type | Cartridge Heater |
| Power Rating | 175 W |
| Supply Voltage | 230 V |
| Length | 1.5in |
| Diameter | 1/4 in |
| Lead Length | 250mm |