Cypress Semiconductor CYBLE-022001-00 Bluetooth Chip 4.1

產品概覽和技術數據資料表
法例與合規
相容
產品詳細資訊

CYBLE-022001-00 EZ-BLE Bluetooth Module

The CYBLE-022001-00 module contains all the necessary components to add low-power Bluetooth BLE wireless connectivity to a project design. It includes a royalty-free BLE stack compatible with the Bluetooth 4.1 standard. PSoC Creator™ provides an integrated design environment (IDE) to configure, develop, program and test a BLE application.

CYBL10 48MHz Cortex-M0 core PRoC with 128KB Flash memory, 16KB RAM
RF Frequency Range: 2400 to 2482MHz ISM band
RF Power Output: up to +3dBm
Receiver Sensitivity: -91dBm
OTA Data Rate: 1Mbps
Up to 16 x GPIO
Up to 15 x capacitive sensors for buttons or sliders with liquid tolerance
8-channel 12-bit, 1Msps ADC with internal reference, sample-and-hold (S/H) and channel sequencer
2 x serial communication blocks (SCB) supporting I²C (master/slave), SPI (master/slave), or UART
Programmable low voltage detect (LVD) from +1.8 to +4.5Vdc
I²S master interface
Chip antenna
BLE protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer and Broadcaster roles
Switches between Central and Peripheral roles on-the-go
Standard BLE profiles and services
Power modes: Active, Sleep, Deep Sleep, Hibernate and Stop
Power supply +1.8V to +5.5Vdc
Operating temperature range: -40 to +85°C
Dimensions: 10 x 10mm, SMT format
Applications: Short range communication for the Internet of Things (IoT)

Note

An evaluation board is available under RS Part No. 124-4199.

Approvals

CE, FCC, IC, MIC, KC

規格
屬性
Bluetooth Version 4.1
Maximum Output Power +3dBm
Receiver Sensitivity -87dBm
Supported Bus Interfaces I2C, SPI, UART
Supported I/O Interfaces Serial
Dimensions 10 x 10 x 1.8mm
Height 1.8mm
Length 10mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Width 10mm
44 現貨庫存,可於6工作日發貨。
單價(不含稅) 個
TWD 485
(不含稅)
TWD 509
(含稅)
單位
Per unit
1 - 9
TWD485
10 - 24
TWD420
25 - 99
TWD389
100 - 499
TWD357
500 +
TWD305
包裝方式: