Threading Tap Sets

What are tap sets?


Used to cut a thread into a piece of material, taps are used similarly to a drill bit but rather than removing material to create a hole, a tap removes material for an existing holes walls to create a screw or bolt thread. Taps can be used with a tap wrench or with a power tool such as a drill. Forming taps by hand with a tap wrench or T wrench gives you the ability to slowly form the thread ensuring it cuts evenly and smoothly for the best finish. Working with power tools to cut threads can be faster for mass produced work but care must be taken to ensure the thread is cut correctly.


Different types of taps


Taper taps are used to start new threads in materials that have not previously been cut. This gradual tapered cut allows for a smooth start to a new thread. These are commonly used in tougher materials like alloy steel to create less strain on the tap as well as on smaller diameter holes with thinner taps that are more prone to breaking whilst cutting.


Second taps, also known as plug or intermediate taps are used similarly to the taper tap, working to create a fresh new thread in material often not having previously been cut. Second taps have a shorter taper but more threads along the cutting length to create more thread, faster. Second taps are one of the most commonly used taps as they can cut fresh threads in material whilst also re-cutting threads in slightly worn or older crossed threads.


Bottom taps, unlike taper and second taps, are a straight, continuous cutting edge with no taper, meaning threads are cut as soon as the tap enters the hole. The full cutting body allows for threads to be cut right down to the bottom of a blind hole. Blind hole tapping is when a thread is cut into a hole that does not pass fully through a piece of material. The bottom tap is typically only used when an existing thread has been cut either with a taper or second tap or when re-cutting an old thread that may have worn or been cross threaded.



...
顯示內容 隱藏內容

篩選條件

正在檢視 41 - 60,共 94 項產品
Results per page
Description Price Set Type Maximum Tap Size Minimum Tap Size Number of Pieces Material Set Contents
RS庫存編號 340-6552
BrandRS PRO
TWD1,740.00
整套:1 個
Set(s)
Spiral Point Tap M12 M3 7 HSS Second Taps: M3; M4; M5; M6; M8; M10; M12
RS庫存編號 241-5117
製造零件編號E524 1/4 X 28 SET
BrandDormer
TWD1,048.00
整套:1 個
Set(s)
Straight Flute Tap 1/4 in UNF 1/4 in UNF 3 HSS Taper Tap; Second Tap and Plug Tap
RS庫存編號 241-5094
製造零件編號E524 NO.10 X 32 SET
BrandDormer
TWD1,135.00
整套:1 個
Set(s)
Straight Flute Tap #10 UNF #10 UNF 3 HSS Taper Tap; Second Tap and Plug Tap
RS庫存編號 174-7892
製造零件編號50121510
BrandGreenlee
TWD3,317.00
整套:1 個
Set(s)
Drill/Tap Kit M10 M3 6 High Speed Steel DTAPM10C M10 x 1.5 Drill/Tap Bit, DTAPM3C M3 x 0.5 Drill/Tap Bit, DTAPM4C M4 x 0.7 Drill/Tap Bit, DTAPM5C M5 x 0.8 Drill/Tap Bit, DTAPM6C M6 x 1 Drill/Tap Bit, DTAPM8C M8 x 1.25 Drill/Tap Bit
RS庫存編號 151-836
BrandRS PRO
TWD233.00
整套:1 個
Set(s)
Straight Flute Tap M8 M8 2 HSS Taper Tap and Plug Tap
RS庫存編號 151-842
BrandRS PRO
TWD162.00
整套:1 個
Set(s)
Straight Flute Tap M4 M4 2 HSS Taper Tap and Plug Tap
RS庫存編號 241-4300
製造零件編號E515 5/16 X 18 SET
BrandDormer
TWD1,011.00
1 套 1 套
Set(s)
Straight Flute Tap 5/16 in UNC 5/16 in UNC 3 HSS Taper Tap; Second Tap and Plug Tap
RS庫存編號 152-356
BrandRS PRO
TWD219.00
整套:1 個
Set(s)
Straight Flute Tap #6 UNC #6 UNC 2 HSS Taper Tap and Plug Tap
RS庫存編號 668-1113
BrandRS PRO
TWD1,674.00
整套:1 個
Set(s)
Left hand thread; Tap M12 M3 7 HSS Second Taps: M3; M4; M5; M6; M8; M10; M12
RS庫存編號 917-2599
BrandRS PRO
TWD1,854.00
整套:1 個
Set(s)
Hand tap and drill set - - 29 High Speed Steel -
RS庫存編號 152-435
BrandRS PRO
TWD444.00
整套:1 個
Set(s)
Straight Flute Tap M16 M16 2 HSS Taper Tap and Plug Tap
RS庫存編號 151-971
BrandRS PRO
TWD249.00
整套:1 個
Set(s)
Straight Flute Tap #10 UNC #10 UNC 2 HSS Taper Tap and Plug Tap
RS庫存編號 241-5123
製造零件編號E524 5/16 X 24 SET
BrandDormer
TWD1,310.00
整套:1 個
Set(s)
Straight Flute Tap 5/16 in UNF 5/16 in UNF 3 HSS Taper Tap; Second Tap and Plug Tap
RS庫存編號 151-864
BrandRS PRO
TWD647.00
整套:1 個
Set(s)
Straight Flute Tap M12 M12 2 HSS Taper Tap and Plug Tap
RS庫存編號 508-9575
製造零件編號10024
BrandEVENTUS
TWD349.00
單位
Hand Tap M10 M10 3 HSS Taper Tap; Second Tap and Plug Tap
RS庫存編號 151-820
BrandRS PRO
TWD531.00
整套:1 個
Set(s)
Straight Flute Tap M7 M7 2 HSS Taper Tap and Plug Tap
RS庫存編號 241-4114
製造零件編號E500 10.0 X 1.50 3FL SET3
BrandDormer
TWD1,166.00
整套:1 個
Set(s)
Straight Flute Tap M10 M10 3 HSS Taper Tap; Plug Tap and Bottom Tap
RS庫存編號 508-8825
製造零件編號01545
BrandEXACT
TWD1,129.00
單位
Hand Tap 1/2 in UNF 1/2 in UNF 2 HSS Taper Tap and Second Tap
RS庫存編號 241-4091
製造零件編號E500 7.0 X 1.00 3FL SET3
BrandDormer
TWD1,664.00
整套:1 個
Set(s)
Straight Flute Tap M7 M7 3 HSS Taper Tap; Plug Tap and Bottom Tap
RS庫存編號 241-5145
製造零件編號E524 1/2 X 20 SET
BrandDormer
TWD2,087.00
整套:1 個
Set(s)
Straight Flute Tap 1/2 in UNF 1/2 in UNF 3 HSS Taper Tap; Second Tap and Plug Tap